RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Bladen County >> Mount Olive >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Mount Olive in the Atlas, the following communities of the 1890's would have been found near the current location of Mount Olive. The following communities are listed based on their distance, with the one closest to Mount Olive listed first.

  • Elizabethtown
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elizabethtown
    • Elizabethtown is located in Bladen County
    • Population from the 2020 Census: 3,378 people
    • Jump to TripAdvisor's Tourism page for Elizabethtown <3>
  • Clarkton
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarkton
    • Clarkton is located in Bladen County
    • Population from the 2020 Census: 741 people
    • Jump to TripAdvisor's Tourism page for Clarkton <3>
  • Elkton
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Elkton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elkton
    • Elkton is located in Bladen County
  • Abbottsburg
    (9 miles [14.5 km] to the southwest)
    • Jump to our Gazetteer entry for Abbottsburg
    • Abbottsburg is located in Bladen County
  • Emerson
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Emerson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emerson
    • Emerson is located in Bladen County
  • Rosindale
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Rosindale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rosindale
    • Rosindale is located in Bladen County
  • Bladenboro
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bladenboro
    • Bladenboro is located in Bladen County
    • Population from the 2020 Census: 1,697 people
    • Jump to TripAdvisor's Tourism page for Bladenboro <3>
  • Westbrook
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Westbrook have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Westbrook
    • Westbrook is located in Bladen County
  • Council
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Council have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Council
    • Council is located in Bladen County
  • Ammon
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Ammon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ammon
    • Ammon is located in Bladen County
  • Richardson
    (14 miles [22.5 km] to the west)
    • Note: The GPS coordinates that we are using for Richardson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richardson
    • Richardson is located in Bladen County
  • Tar Heel
    (15 miles [24.1 km] to the northwest)
  • Kelly
    (17 miles [27.4 km] to the southeast)
    • Jump to our Gazetteer entry for Kelly
    • Kelly is located in Bladen County
  • Kerr
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Kerr have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kerr
    • Kerr is located in Sampson County
  • Tomahawk
    (17 miles [27.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Tomahawk have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tomahawk
    • Tomahawk is located in Sampson County
  • Garland
    (17 miles [27.4 km] to the northeast)
  • Whiteville
    (18 miles [29 km] to the south)
  • Hallsboro
    (18 miles [29 km] to the south)
    • Jump to our Gazetteer entry for Hallsboro
    • Hallsboro is located in Columbus County
  • Lake Waccamaw
    (19 miles [30.6 km] to the south)
    • Note: The GPS coordinates that we are using for Lake Waccamaw have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake Waccamaw
    • Lake Waccamaw is located in Columbus County
    • Population from the 2020 Census: 1,392 people
    • Jump to TripAdvisor's Tourism page for Lake Waccamaw <3>
  • Jerome
    (19 miles [30.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Jerome have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jerome
    • Jerome is located in Bladen County
  • Ivanhoe
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Ivanhoe have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ivanhoe
    • Ivanhoe is located in Sampson County
  • Parkersburg
    (19 miles [30.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parkersburg
    • Parkersburg is located in Sampson County
  • Allenton
    (19 miles [30.6 km] to the west)
    • Jump to our Gazetteer entry for Allenton
    • Allenton is located in Robeson County
  • Bolton
    (20 miles [32.2 km] to the southeast)
  • Colly
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Colly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colly
    • Colly is located in Bladen County
  • Clear Run
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Clear Run have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clear Run
    • Clear Run is located in Sampson County
  • Tolarsville
    (20 miles [32.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Tolarsville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tolarsville
    • Tolarsville is located in Robeson County
  • Howellsville
    (20 miles [32.2 km] to the west)
    • Note: The GPS coordinates that we are using for Howellsville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Howellsville
    • Howellsville is located in Robeson County

The official website for Bladen County: www.bladeninfo.net/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mount Olive, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 23 Nov 2024