Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Minpro in the Atlas, the following communities of the 1890's would have been found near the current location of Minpro. The following communities are listed based on their distance, with the one closest to Minpro listed first.
- Spruce Pine
(Less than 2 miles to the southeast)- Jump to our Gazetteer entry for Spruce Pine
- Spruce Pine is located in Mitchell County
- Population from the 2020 Census: 2,126 people
- Jump to TripAdvisor's Tourism page for Spruce Pine <2>
- Penland
(Less than 2 miles to the west)- Note: The GPS coordinates that we are using for Penland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Penland
- Penland is located in Mitchell County
- Jump to TripAdvisor's Tourism page for Penland <2>
- Estatoe
(2 miles [3.2 km] to the southwest) - Ledger
(3 miles [4.8 km] to the northwest) - Bandana
(5 miles [8 km] to the northwest) - Bakersville
(7 miles [11.3 km] to the northwest)- Jump to our Gazetteer entry for Bakersville
- Bakersville is located in Mitchell County
- Population from the 2020 Census: 441 people
- Jump to TripAdvisor's Tourism page for Bakersville <2>
- Celo
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Celo
- Celo is located in Yancey County
- North Cove
(8 miles [12.9 km] to the southeast)- Note: The GPS coordinates that we are using for North Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Cove
- North Cove is located in McDowell County
- Ashford
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Ashford
- Ashford is located in McDowell County
- Glen Ayre
(9 miles [14.5 km] to the north) - Little Rock Creek ‑ Historic
(9 miles [14.5 km] to the northwest)- Note: The GPS coordinates that we are using for Little Rock Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Rock Creek
- Little Rock Creek is located in Mitchell County
- Windom
(9 miles [14.5 km] to the west) - Crossnore
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Crossnore
- Crossnore is located in Avery County
- Population from the 2020 Census: 231 people
- Jump to TripAdvisor's Tourism page for Crossnore <2>
- Red Hill
(10 miles [16.1 km] to the northwest) - Green Mountain
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Green Mountain
- Green Mountain is located in Yancey County
- Jump to TripAdvisor's Tourism page for Green Mountain <2>
- Jonas Ridge
(11 miles [17.7 km] to the east)- Jump to our Gazetteer entry for Jonas Ridge
- Jonas Ridge is located in Burke County
- Jump to TripAdvisor's Tourism page for Jonas Ridge <2>
- Herrell ‑ Historic
(11 miles [17.7 km] to the northwest) - Burnsville
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Burnsville
- Burnsville is located in Yancey County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Burnsville <2>
- Cloudland ‑ Historic
(12 miles [19.3 km] to the north) - Day Book
(12 miles [19.3 km] to the west) - Pensacola
(13 miles [20.9 km] to the southwest) - Toms Creek
(13 miles [20.9 km] to the south)- Note: The GPS coordinates that we are using for Toms Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toms Creek
- Toms Creek is located in McDowell County
- Relief
(13 miles [20.9 km] to the northwest) - Heaton Creek
(15 miles [24.1 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Heaton Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Heaton Creek
- Heaton Creek is located in Carter County (TN)
- Burbank
(15 miles [24.1 km] to the north)
Off-the-Road Links ...
The official website for Mitchell County: www.mitchellcounty.org/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Minpro, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |