|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find McGee Mill in the Atlas, the following communities of the 1890's would have been found near the current location of McGee Mill. The following communities are listed based on their distance, with the one closest to McGee Mill listed first.
- Barclaysville
(5 miles [8 km] to the southwest)
- Barclaysville is located in Harnett County
- Jump to our Gazetteer entry for Barclaysville
- Spilona
(7 miles [11.3 km] to the east)
- Spilona is located in Johnston County
- Jump to our Gazetteer entry for Spilona
- Benson
(8 miles [12.9 km] to the south)
- Turlington
(10 miles [16.1 km] to the south)
- Turlington is located in Harnett County
- Jump to our Gazetteer entry for Turlington
- Four Oaks
(10 miles [16.1 km] to the east)
- Banks
(11 miles [17.7 km] to the northwest)
- Banks is located in Wake County
- Jump to our Gazetteer entry for Banks
- Clayton
(12 miles [19.3 km] to the northeast)
- Dunn
(13 miles [20.9 km] to the south)
- Auburn
(13 miles [20.9 km] to the north)
- Auburn is located in Wake County
- Jump to our Gazetteer entry for Auburn
- Lillington
(14 miles [22.5 km] to the southwest)
- Smithfield
(14 miles [22.5 km] to the east)
- Wilson's Mills
(14 miles [22.5 km] to the northeast)
- Wilson's Mills is located in Johnston County
- Jump to our Gazetteer entry for Wilson's Mills
- Population from the 2020 Census: 2,847 people
- Garner
(14 miles [22.5 km] to the north)
- Bunnlevel
(16 miles [25.7 km] to the southwest)
- Bunnlevel is located in Harnett County
- Jump to our Gazetteer entry for Bunnlevel
- Averasboro ‑ Historic
(17 miles [27.4 km] to the south)
- Averasboro is located in Harnett County
- Jump to our Gazetteer entry for Averasboro
- McKoy
(17 miles [27.4 km] to the south)
- McKoy is located in Johnston County
- Jump to our Gazetteer entry for McKoy
- Selma
(17 miles [27.4 km] to the east)
- Holly Springs
(17 miles [27.4 km] to the northwest)
- Archer Lodge
(18 miles [29 km] to the northeast)
- Archer Lodge is located in Johnston County
- Jump to our Gazetteer entry for Archer Lodge
- Population from the 2020 Census: 5,322 people
- Archer Lodge has also been known as:
- Archer
- Shotwell
(18 miles [29 km] to the northeast)
- Shotwell is located in Wake County
- Jump to our Gazetteer entry for Shotwell
- Bentonville
(19 miles [30.6 km] to the southeast)
- Bentonville is located in Johnston County
- Jump to our Gazetteer entry for Bentonville
- Oliver
(19 miles [30.6 km] to the east)
- Oliver is located in Johnston County
- Jump to our Gazetteer entry for Oliver
- Pine Level
(19 miles [30.6 km] to the east)
- Raleigh
(19 miles [30.6 km] to the north)
- Method
(20 miles [32.2 km] to the north)
- Method is located in Wake County
- Jump to our Gazetteer entry for Method
- Godwin
(20 miles [32.2 km] to the south)
- Timothy
(20 miles [32.2 km] to the south)
- Timothy is located in Sampson County
- Jump to our Gazetteer entry for Timothy
- Blackmans Mills
(20 miles [32.2 km] to the southeast)
- Blackmans Mills is located in Sampson County
- Jump to our Gazetteer entry for Blackmans Mills
- Harper
(20 miles [32.2 km] to the southeast)
- Harper is located in Johnston County
- Jump to our Gazetteer entry for Harper
- Milburnie
(20 miles [32.2 km] to the north)
- Milburnie is located in Wake County
- Jump to our Gazetteer entry for Milburnie
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about McGee Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|