|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find McDaniels in the Atlas, the following communities of the 1890's would have been found near the current location of McDaniels. The following communities are listed based on their distance, with the one closest to McDaniels listed first.
- Parkersburg
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkersburg
- Parkersburg is located in Sampson County
- Ingold
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ingold. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ingold
- Ingold is located in Sampson County
- Google driving directions:
- From your current location to Ingold
- From McDaniels to Ingold
- Roseboro
(6 miles [9.7 km] to the northwest)
- Garland
(7 miles [11.3 km] to the southeast)
- Ammon
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Ammon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ammon
- Ammon is located in Bladen County
- Clinton
(10 miles [16.1 km] to the northeast)
- Hayne
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Hayne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hayne
- Hayne is located in Sampson County
- Taylors Bridge
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Taylors Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylors Bridge
- Taylors Bridge is located in Sampson County
- Clear Run
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Clear Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Run
- Clear Run is located in Sampson County
- Huntley
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Huntley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntley
- Huntley is located in Sampson County
- Tomahawk
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Tomahawk. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tomahawk
- Tomahawk is located in Sampson County
- Google driving directions:
- From your current location to Tomahawk
- From McDaniels to Tomahawk
- Autryville
(13 miles [20.9 km] to the northwest)
- Waycross
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Waycross have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waycross
- Waycross is located in Sampson County
- Elliott
(15 miles [24.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Elliott. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elliott
- Elliott is located in Sampson County
- Google driving directions:
- From your current location to Elliott
- From McDaniels to Elliott
- Jerome
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jerome
- Jerome is located in Bladen County
- Google driving directions:
- From your current location to Jerome
- From McDaniels to Jerome
- Turkey
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Turkey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Turkey
- Turkey is located in Sampson County
- Population from the 2020 Census: 292 people
- Jump to TripAdvisor's Tourism page for Turkey <4>
- Beaman Crossroads
(16 miles [25.7 km] to the north)
- Stedman
(16 miles [25.7 km] to the northwest)
- Keener
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Keener. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Keener
- Keener is located in Sampson County
- Google driving directions:
- From your current location to Keener
- From McDaniels to Keener
- Clement
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Clement have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clement
- Clement is located in Sampson County
- Kerr
(18 miles [29 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Kerr. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Kerr
- Kerr is located in Sampson County
- Google driving directions:
- From your current location to Kerr
- From McDaniels to Kerr
- Cedar Creek
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Cedar Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Creek
- Cedar Creek is located in Cumberland County
- Elizabethtown
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <4>
- Warsaw
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warsaw
- Warsaw is located in Duplin County
- Population from the 2020 Census: 3,084 people
- Jump to TripAdvisor's Tourism page for Warsaw <4>
- Tar Heel
(22 miles [35.4 km] to the southwest)
- Mingo
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Mingo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mingo
- Mingo is located in Sampson County
- Ivanhoe
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ivanhoe. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ivanhoe
- Ivanhoe is located in Sampson County
- Google driving directions:
- From your current location to Ivanhoe
- From McDaniels to Ivanhoe
- Magnolia
(22 miles [35.4 km] to the east)
- Bowdens
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Bowdens have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowdens
- Bowdens is located in Duplin County
- Vander
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Vander have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vander
- Vander is located in Cumberland County
Off-the-Road Links ...
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about McDaniels, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|