|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Maready in the Atlas, the following communities of the 1890's would have been found near the current location of Maready. The following communities are listed based on their distance, with the one closest to Maready listed first.
- Sloan
(2 miles [3.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sloan. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sloan
- Sloan is located in Duplin County
- Google driving directions:
- From your current location to Sloan
- From Maready to Sloan
- Chinquapin
(2 miles [3.2 km] to the northwest)
- Lyman
(4 miles [6.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Lyman. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lyman
- Lyman is located in Duplin County
- Google driving directions:
- From your current location to Lyman
- From Maready to Lyman
- Hallsville
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Hallsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hallsville
- Hallsville is located in Duplin County
- Beulaville
(8 miles [12.9 km] to the north)
- Angola
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Angola have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Angola
- Angola is located in Onslow County
- Maple Hill
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Maple Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Maple Hill
- Maple Hill is located in Pender County
- Google driving directions:
- From your current location to Maple Hill
- From Maready to Maple Hill
- Teachey
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Teachey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teachey
- Teachey is located in Duplin County
- Population from the 2020 Census: 430 people
- Wallace
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Wallace have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wallace
- Wallace is located in Duplin County
- Population from the 2020 Census: 3,859 people
- Jump to TripAdvisor's Tourism page for Wallace <4>
- Sarecta
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sarecta. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sarecta
- Sarecta is located in Duplin County
- Google driving directions:
- From your current location to Sarecta
- From Maready to Sarecta
- Catherine Lake
(12 miles [19.3 km] to the east)
- Cyrus
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Cyrus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cyrus
- Cyrus is located in Onslow County
- Rose Hill
(13 miles [20.9 km] to the west)
- Kenansville
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Kenansville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenansville
- Kenansville is located in Duplin County
- Population from the 2020 Census: 850 people
- Jump to TripAdvisor's Tourism page for Kenansville <4>
- Safe
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Safe. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Safe
- Safe is located in Duplin County
- Google driving directions:
- From your current location to Safe
- From Maready to Safe
- Richlands
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richlands
- Richlands is located in Onslow County
- Population from the 2020 Census: 1,718 people
- Jump to TripAdvisor's Tourism page for Richlands <4>
- Leon
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Leon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leon
- Leon is located in Duplin County
- Tar Landing
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Tar Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tar Landing
- Tar Landing is located in Onslow County
- Magnolia
(16 miles [25.7 km] to the west)
- Gum Branch
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Gum Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Branch
- Gum Branch is located in Onslow County
- Burgaw
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Burgaw have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgaw
- Burgaw is located in Pender County
- Population from the 2020 Census: 4,127 people
- Jump to TripAdvisor's Tourism page for Burgaw <4>
- Resaca
(18 miles [29 km] to the north)
- Comfort
(20 miles [32.2 km] to the northeast)
- Jacksonville
(21 miles [33.8 km] to the east)
- Albertson
(21 miles [33.8 km] to the north)
- Warsaw
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Warsaw have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warsaw
- Warsaw is located in Duplin County
- Population from the 2020 Census: 3,084 people
- Jump to TripAdvisor's Tourism page for Warsaw <4>
Off-the-Road Links ...
The official website for Duplin County: www.duplincounty.org/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Maready, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|