Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Malpass Corner in the Atlas, the following communities of the 1890's would have been found near the current location of Malpass Corner. The following communities are listed based on their distance, with the one closest to Malpass Corner listed first.
- Currie
(3 miles [4.8 km] to the southwest)
- Montague
(4 miles [6.4 km] to the south)
- Montague is located in Pender County
- Jump to our Gazetteer entry for Montague
- Long Creek
(4 miles [6.4 km] to the southeast)
- Long Creek is located in Pender County
- Jump to our Gazetteer entry for Long Creek
- Point Caswell
(6 miles [9.7 km] to the west)
- Point Caswell is located in Pender County
- Jump to our Gazetteer entry for Point Caswell
- Atkinson
(6 miles [9.7 km] to the west)
- Burgaw
(8 miles [12.9 km] to the northeast)
- Ashton
(9 miles [14.5 km] to the east)
- Ashton is located in Pender County
- Jump to our Gazetteer entry for Ashton
- Rocky Point
(10 miles [16.1 km] to the southeast)
- Colly
(11 miles [17.7 km] to the west)
- Colly is located in Bladen County
- Jump to our Gazetteer entry for Colly
- Ivanhoe
(12 miles [19.3 km] to the northwest)
- Ivanhoe is located in Sampson County
- Jump to our Gazetteer entry for Ivanhoe
- Castle Hayne
(13 miles [20.9 km] to the southeast)
- Northwest
(14 miles [22.5 km] to the southwest)
- Northwest is located in Brunswick County
- Jump to our Gazetteer entry for Northwest
- Population from the 2020 Census: 806 people
- Phoenix
(14 miles [22.5 km] to the south)
- Phoenix is located in Brunswick County
- Jump to our Gazetteer entry for Phoenix
- Armour
(15 miles [24.1 km] to the southwest)
- Armour is located in Columbus County
- Jump to our Gazetteer entry for Armour
- Kelly
(15 miles [24.1 km] to the west)
- Kelly is located in Bladen County
- Jump to our Gazetteer entry for Kelly
- Safe
(16 miles [25.7 km] to the north)
- Safe is located in Duplin County
- Jump to our Gazetteer entry for Safe
- Malmo
(16 miles [25.7 km] to the south)
- Malmo is located in Brunswick County
- Jump to our Gazetteer entry for Malmo
- Navassa
(16 miles [25.7 km] to the south)
- Navassa is located in Brunswick County
- Jump to our Gazetteer entry for Navassa
- Population from the 2020 Census: 2,534 people
- Wrightsboro
(16 miles [25.7 km] to the southeast)
- Wrightsboro is located in New Hanover County
- Jump to our Gazetteer entry for Wrightsboro
- Wallace
(16 miles [25.7 km] to the north)
- Kerr
(16 miles [25.7 km] to the northwest)
- Kerr is located in Sampson County
- Jump to our Gazetteer entry for Kerr
- Freeman
(18 miles [29 km] to the southwest)
- Freeman is located in Columbus County
- Jump to our Gazetteer entry for Freeman
- Teachey
(18 miles [29 km] to the north)
- Teachey is located in Duplin County
- Jump to our Gazetteer entry for Teachey
- Population from the 2020 Census: 430 people
- Byrdville
(19 miles [30.6 km] to the southwest)
- Byrdville is located in Columbus County
- Jump to our Gazetteer entry for Byrdville
- Kirkland
(20 miles [32.2 km] to the southeast)
- Kirkland is located in New Hanover County
- Jump to our Gazetteer entry for Kirkland
- Scotts Hill
(20 miles [32.2 km] to the southeast)
- Scotts Hill is located in Pender County
- Jump to our Gazetteer entry for Scotts Hill
- Westbrook
(20 miles [32.2 km] to the west)
- Westbrook is located in Bladen County
- Jump to our Gazetteer entry for Westbrook
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Malpass Corner, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |