Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Littles Mill (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Littles Mill. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Littles Mill is located in Richmond County.
To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Richmond County: Anson, Montgomery, Moore, Scotland & Marlboro (SC).
Below are the counties that are near Littles Mill. For each of these counties, we show a sample of those communities that are closest to Littles Mill:
- Richmond County (The home county of Littles Mill)
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Mangum
(4 miles [6.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Mangum. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mangum
- Mangum is located in Richmond County
- Ellerbe
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Ellerbe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellerbe
- Ellerbe is located in Richmond County
- Population from the 2020 Census: 968 people
- Jump to TripAdvisor's Tourism page for Ellerbe <3>
- Norman
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Norman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norman
- Norman is located in Richmond County
- Population from the 2020 Census: 130 people
- Honey Town
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Honey Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Honey Town
- Honey Town is located in Richmond County
- Yates Hill
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Yates Hill
- Yates Hill is located in Richmond County
- Cordova
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Cordova have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cordova
- Cordova is located in Richmond County
- Rockingham
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Rockingham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockingham
- Rockingham is located in Richmond County
- Population from the 2020 Census: 8,520 people
- Jump to TripAdvisor's Tourism page for Rockingham <3>
- East Rockingham
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for East Rockingham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Rockingham
- East Rockingham is located in Richmond County
- Dobbins Heights
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Dobbins Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dobbins Heights
- Dobbins Heights is located in Richmond County
- Population from the 2020 Census: 780 people
- Hoffman
(22 miles [35.4 km] to the east)
- Jump to our Gazetteer entry for Hoffman
- Hoffman is located in Richmond County
- Population from the 2020 Census: 571 people
- Hamlet
(22 miles [35.4 km] to the southeast)
- Marston
(22 miles [35.4 km] to the southeast)
- Jump to our Gazetteer entry for Marston
- Marston is located in Richmond County
- New Town
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for New Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Town
- New Town is located in Richmond County
- Anson County
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Ansonville
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Ansonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ansonville
- Ansonville is located in Anson County
- Population from the 2020 Census: 586 people
- Lilesville
(13 miles [20.9 km] to the south)
- Roper ‑ Historic
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Roper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roper
- Roper is located in Anson County
- Wadesboro
(15 miles [24.1 km] to the southwest)
- Sugar Town
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Sugar Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugar Town
- Sugar Town is located in Anson County
- Burnsville
(18 miles [29 km] to the west)
- Jump to our Gazetteer entry for Burnsville
- Burnsville is located in Anson County
- Polkton
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Polkton
- Polkton is located in Anson County
- Population from the 2020 Census: 2,288 people
- Morven
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Morven
- Morven is located in Anson County
- Population from the 2020 Census: 465 people
- Peachland
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Peachland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peachland
- Peachland is located in Anson County
- Population from the 2020 Census: 402 people
- Jump to TripAdvisor's Tourism page for Peachland <3>
- McFarlan
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for McFarlan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McFarlan
- McFarlan is located in Anson County
- Population from the 2020 Census: 107 people
- Mineral Springs
(23 miles [37 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Mineral Springs. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mineral Springs
- Mineral Springs is located in Anson County
- Davidson County
- Complex
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Complex
- Complex is located in Davidson County
- Montgomery County
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Mount Gilead
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Montgomery County
- Population from the 2020 Census: 1,141 people
- Wadeville
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wadeville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wadeville
- Wadeville is located in Montgomery County
- Troy
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Troy
- Troy is located in Montgomery County
- Population from the 2020 Census: 3,293 people
- Jump to TripAdvisor's Tourism page for Troy <3>
- Candor
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Candor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Candor
- Candor is located in Montgomery County
- Population from the 2020 Census: 817 people
- Jump to TripAdvisor's Tourism page for Candor <3>
- Shiloh ‑ Historic
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Shiloh have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Montgomery County
- Biscoe
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Biscoe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Biscoe
- Biscoe is located in Montgomery County
- Population from the 2020 Census: 1,707 people
- Jump to TripAdvisor's Tourism page for Biscoe <3>
- Star
(18 miles [29 km] to the northeast)
- Allreds
(21 miles [33.8 km] to the north)
- Jump to our Gazetteer entry for Allreds
- Allreds is located in Montgomery County
- Ether
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Ether have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ether
- Ether is located in Montgomery County
- Eldorado
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Eldorado
- Eldorado is located in Montgomery County
- Ophir
(22 miles [35.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ophir. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ophir
- Ophir is located in Montgomery County
- Abner
(23 miles [37 km] to the north)
- Jump to our Gazetteer entry for Abner
- Abner is located in Montgomery County
- Asbury
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Asbury. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Asbury
- Asbury is located in Montgomery County
- Moore County
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Jackson Springs
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Jackson Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson Springs
- Jackson Springs is located in Moore County
- Eagle Springs
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Eagle Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagle Springs
- Eagle Springs is located in Moore County
- Jump to TripAdvisor's Tourism page for Eagle Springs <3>
- Foxfire
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Foxfire have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Foxfire
- Foxfire is located in Moore County
- Population from the 2020 Census: 1,061 people
- West End
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for West End have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West End
- West End is located in Moore County
- Jump to TripAdvisor's Tourism page for West End <3>
- Seven Lakes
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Seven Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seven Lakes
- Seven Lakes is located in Moore County
- Zion Grove
(21 miles [33.8 km] to the northeast)
- Jump to our Gazetteer entry for Zion Grove
- Zion Grove is located in Moore County
- Dover
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dover
- Dover is located in Moore County
- Harris
(23 miles [37 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Harris. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Harris
- Harris is located in Moore County
- Taylortown
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Taylortown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylortown
- Taylortown is located in Moore County
- Population from the 2020 Census: 880 people
- Pinebluff
(25 miles [40.2 km] to the east)
- Pinehurst
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Pinehurst have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinehurst
- Pinehurst is located in Moore County
- Population from the 2020 Census: 17,014 people
- Jump to TripAdvisor's Tourism page for Pinehurst <3>
- Silver Springs
(25 miles [40.2 km] to the east)
- Jump to our Gazetteer entry for Silver Springs
- Silver Springs is located in Moore County
- Robbins
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Robbins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robbins
- Robbins is located in Moore County
- Population from the 2020 Census: 1,241 people
- Jump to TripAdvisor's Tourism page for Robbins <3>
- Randolph County
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Eleazer
(25 miles [40.2 km] to the north)
- Jump to our Gazetteer entry for Eleazer
- Eleazer is located in Randolph County
- Seagrove
(27 miles [43.5 km] to the north)
- Yow Mill
(29 miles [46.7 km] to the north)
- Jump to our Gazetteer entry for Yow Mill
- Yow Mill is located in Randolph County
- Michfield
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Michfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Michfield
- Michfield is located in Randolph County
- Stanly County
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Norwood
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Norwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norwood
- Norwood is located in Stanly County
- Population from the 2020 Census: 2,469 people
- Jump to TripAdvisor's Tourism page for Norwood <3>
- Badin
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Badin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Badin
- Badin is located in Stanly County
- Population from the 2020 Census: 1,934 people
- Jump to TripAdvisor's Tourism page for Badin <3>
- Albemarle
(21 miles [33.8 km] to the northwest)
- Cedar Village
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Cedar Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Village
- Cedar Village is located in Stanly County
- Palmerville
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Palmerville
- Palmerville is located in Stanly County
- Oakboro
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Oakboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakboro
- Oakboro is located in Stanly County
- Population from the 2020 Census: 1,928 people
- Jump to TripAdvisor's Tourism page for Oakboro <3>
- Bloomington
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Bloomington. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bloomington
- Bloomington is located in Stanly County
- Plyer
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Plyer. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Plyer
- Plyer is located in Stanly County
- New London
(26 miles [41.8 km] to the northwest)
- Red Cross
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Red Cross have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Cross
- Red Cross is located in Stanly County
- Population from the 2020 Census: 769 people
- Lambert
(27 miles [43.5 km] to the northwest)
- Jump to our Gazetteer entry for Lambert
- Lambert is located in Stanly County
- Richfield
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Richfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richfield
- Richfield is located in Stanly County
- Population from the 2020 Census: 627 people
- Jump to TripAdvisor's Tourism page for Richfield <3>
- Stanfield
(29 miles [46.7 km] to the west)
- Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanfield
- Stanfield is located in Stanly County
- Population from the 2020 Census: 1,552 people
- Jump to TripAdvisor's Tourism page for Stanfield <3>
- Union County
- The following are listed by their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Fairfield
(27 miles [43.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Fairfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Union County
- Marshville
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Marshville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshville
- Marshville is located in Union County
- Population from the 2020 Census: 2,835 people
- Jump to TripAdvisor's Tourism page for Marshville <3>
- Chesterfield County (SC)
- Chesterfield
(30 miles [48.3 km] to the south)
- Marlboro County (SC)
- Wallace
(30 miles [48.3 km] to the south)
For an expanded list of the communities that are closest to Littles Mill, see our County-by-County Page for Littles Mill.
Cemeteries Near Littles Mill ...
Below are cemeteries that are in the vicinity of Littles Mill.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Littles Mill covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Ledbetter Cemetery
(Less than 2 miles to the southwest)
- Jump to our Gazetteer entry for the Ledbetter Cemetery
- Note: The GPS coordinates that we are using for the Ledbetter Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Parsons - Howell Cemetery
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for the Parsons - Howell Cemetery
- Note: The GPS coordinates that we are using for the Parsons - Howell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sharon Cemetery
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for the Sharon Cemetery
- Note: The GPS coordinates that we are using for the Sharon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Legrand Cemetery
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for the Legrand Cemetery
- Note: The GPS coordinates that we are using for the Legrand Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Machine House Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Machine House Cemetery
- Note: The GPS coordinates that we are using for the Machine House Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Haywood Cemetery
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for the Haywood Cemetery
- Note: The GPS coordinates that we are using for the Haywood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Ropers Grove Cemetery
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for the Ropers Grove Cemetery
- Note: The GPS coordinates that we are using for the Ropers Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- McRae Cemetery
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for the McRae Cemetery
- Note: The GPS coordinates that we are using for the McRae Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Blake Cemetery
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for the Blake Cemetery
- Note: The GPS coordinates that we are using for the Blake Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Chisolm Cemetery
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for the Chisolm Cemetery
- Note: The GPS coordinates that we are using for the Chisolm Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Bruton Cemetery
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for the Bruton Cemetery
- Note: The GPS coordinates that we are using for the Bruton Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Gum Springs Cemetery
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for the Gum Springs Cemetery
- Note: The GPS coordinates that we are using for the Gum Springs Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (142 more) ...
- Williamson Cemetery
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for the Williamson Cemetery
- Note: The GPS coordinates that we are using for the Williamson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Munn Cemetery
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for the Munn Cemetery
- Note: The GPS coordinates that we are using for the Munn Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Piney Grove Cemetery
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for the Piney Grove Cemetery
- Note: The GPS coordinates that we are using for the Piney Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>
The Rand McNally Atlas shows that Littles Mill had a population of 67 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Littles Mill, with the one closest to Littles Mill listed first.
- Mangum
(4 miles [6.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Mangum. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mangum
- Mangum is located in Richmond County
- Covington
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Covington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Covington
- Covington is located in Richmond County
- Pekin
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Pekin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pekin
- Pekin is located in Montgomery County
- Capels Mill
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Capels Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Capels Mill
- Capels Mill is located in Richmond County
- Harrisville
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Harrisville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrisville
- Harrisville is located in Montgomery County
- Mount Gilead
(6 miles [9.7 km] to the northwest)
- Jump to our Gazetteer entry for Mount Gilead
- Mount Gilead is located in Montgomery County
- Population from the 2020 Census: 1,141 people
- Pee Dee ‑ Historic
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Pee Dee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pee Dee
- Pee Dee is located in Anson County
- Wadeville
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wadeville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wadeville
- Wadeville is located in Montgomery County
- Onvil
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Onvil have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Onvil
- Onvil is located in Montgomery County
- Ansonville
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Ansonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ansonville
- Ansonville is located in Anson County
- Population from the 2020 Census: 586 people
- Cedar Hill
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Cedar Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Hill
- Cedar Hill is located in Anson County
- Norwood
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Norwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norwood
- Norwood is located in Stanly County
- Population from the 2020 Census: 2,469 people
- Jump to TripAdvisor's Tourism page for Norwood <3>
- Continue List (14 more) ...
- Lilesville
(13 miles [20.9 km] to the south)
- Candor
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Candor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Candor
- Candor is located in Montgomery County
- Population from the 2020 Census: 817 people
- Jump to TripAdvisor's Tourism page for Candor <3>
- Troy
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Troy
- Troy is located in Montgomery County
- Population from the 2020 Census: 3,293 people
- Jump to TripAdvisor's Tourism page for Troy <3>
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Littles Mill. See our List of 1890's Communities around Littles Mill.
Newspapers Published in Littles Mill ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 86 newspapers that have been published in the area around Littles Mill.
Although we're unaware of any newspapers that were published in the immediate area of Littles Mill, there are papers which were published within 22 miles [35.4 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Littles Mill.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Littles Mill:
- Websites specific to North Carolina
- Pages specific to Richmond County
- Genealogy information for nearby counties
- Anson County
- Davidson County
- Montgomery County
- Moore County
- Randolph County
- Stanly County
- Union County
- Chesterfield County
- Marlboro County
- Cemetery Information and Directories for North Carolina
Off-the-Road Links ...
Unfortunately, we don't know of a website for Littles Mill. If you can help, please contact us through our Feedback Page.
The official website for Richmond County: www.co.richmond.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Littles Mill, please let us know so that we can improve our accuracy. |
<5> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Littles Mill) to Point B.Our distance measurements begin at a specific point in Littles Mill. The point we use is located at these GPS coordinates - Latitude: 35.1526, Longitude: -79.9178 In this case, the coordinates for Littles Mill have been provided by the Geographic Names Information System (GNIS). |