RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Rutherford County >> Jeter >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Our Genealogy Helper

Introduction ...

So far, we found very little information about Jeter. The little that we've found leads us believe that the community is historic.<1>

We've added Jeter to our Gazetteer with the hope that we can develop more information. If you can help us with Jeter, please Contact Us.

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Jeter (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Jeter. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Although our information shows that the community of Jeter is historic, it would have been located within present day Rutherford County.

To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Rutherford County: Buncombe, Burke, Cleveland, Henderson, McDowell, Polk, Cherokee (SC) & Spartanburg (SC).

Below are the counties that are near Jeter. For each of these counties, we show a sample of those communities that are closest to Jeter:

  • Rutherford County     (The home county of Jeter)
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Otter Creek ‑ Historic
      (3 miles [4.8 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Otter Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Otter Creek
      • Otter Creek is located in Rutherford County
    • Whitehouse
      (3 miles [4.8 km] to the east)
      • Jump to our Gazetteer entry for Whitehouse
      • Whitehouse is located in Rutherford County
    • Lake Lure
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lake Lure
      • Lake Lure is located in Rutherford County
      • Population from the 2020 Census: 1,153 people
      • Jump to TripAdvisor's Tourism page for Lake Lure <4>
    • Village of Chimney Rock Village
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Village of Chimney Rock Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Village of Chimney Rock Village
      • Village of Chimney Rock Village is located in Rutherford County
      • Estimated population in 2015: 108 people
    • Chimney Rock
      (6 miles [9.7 km] to the southwest)
    • Green Hill
      (9 miles [14.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Green Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Green Hill
      • Green Hill is located in Rutherford County
    • Thermal City
      (10 miles [16.1 km] to the east)
      • Note: The GPS coordinates that we are using for Thermal City have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thermal City
      • Thermal City is located in Rutherford County
    • Union Mills
      (11 miles [17.7 km] to the east)
    • Ruth
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ruth have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ruth
      • Ruth is located in Rutherford County
      • Population from the 2020 Census: 400 people
    • Rutherfordton
      (14 miles [22.5 km] to the southeast)
    • Mount Pisgah ‑ Historic
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Mount Pisgah have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Pisgah
      • Mount Pisgah is located in Rutherford County
    • Spindale
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Spindale
      • Spindale is located in Rutherford County
      • Population from the 2020 Census: 4,175 people
      • Jump to TripAdvisor's Tourism page for Spindale <4>
  • Buncombe County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Ridgecrest
      (10 miles [16.1 km] to the northwest)
    • Black Mountain
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Black Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Black Mountain
      • Black Mountain is located in Buncombe County
      • Population from the 2020 Census: 8,256 people
      • Jump to TripAdvisor's Tourism page for Black Mountain <4>
    • Montreat
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Montreat have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montreat
      • Montreat is located in Buncombe County
      • Population from the 2020 Census: 939 people
      • Jump to TripAdvisor's Tourism page for Montreat <4>
    • Swannanoa
      (14 miles [22.5 km] to the northwest)
    • Walkertown
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walkertown
      • Walkertown is located in Buncombe County
    • Wilson
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Wilson have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wilson
      • Wilson is located in Buncombe County
    • Azalea
      (18 miles [29 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Azalea. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Azalea
      • Azalea is located in Buncombe County
    • Swannanoa Hills
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Swannanoa Hills
      • Swannanoa Hills is located in Buncombe County
    • Riceville
      (19 miles [30.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Riceville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Riceville
      • Riceville is located in Buncombe County
    • Fairview
      (19 miles [30.6 km] to the west)
      • Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Buncombe County
      • Jump to TripAdvisor's Tourism page for Fairview <4>
    • Arden
      (20 miles [32.2 km] to the west)
    • Busbee
      (20 miles [32.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Busbee. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Busbee
      • Busbee is located in Buncombe County
  • Burke County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Brindletown
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Brindletown
      • Brindletown is located in Burke County
    • Rollins ‑ Historic
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Rollins have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rollins
      • Rollins is located in Burke County
    • Parkhill
      (24 miles [38.6 km] to the northeast)
      • Jump to our Gazetteer entry for Parkhill
      • Parkhill is located in Burke County
    • Linville
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Linville have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Linville
      • Linville is located in Burke County
    • Glen Alpine
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Glen Alpine have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glen Alpine
      • Glen Alpine is located in Burke County
      • Population from the 2020 Census: 1,487 people
      • Jump to TripAdvisor's Tourism page for Glen Alpine <4>
    • Calvin
      (28 miles [45.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Calvin. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Calvin
      • Calvin is located in Burke County
    • Salem
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salem
      • Salem is located in Burke County
    • Enola
      (30 miles [48.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Enola. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Enola
      • Enola is located in Burke County
    • Magnolia
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Magnolia have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Magnolia
      • Magnolia is located in Burke County
    • Morganton
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Morganton have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morganton
      • Morganton is located in Burke County
      • Population from the 2020 Census: 16,625 people
      • Jump to TripAdvisor's Tourism page for Morganton <4>
  • Cleveland County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • New House
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for New House. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for New House
      • New House is located in Cleveland County
    • Cliffside
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cliffside have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cliffside
      • Cliffside is located in Cleveland County
    • Delight
      (29 miles [46.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Delight. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Delight
      • Delight is located in Cleveland County
    • Polkville
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Polkville have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Polkville
      • Polkville is located in Cleveland County
      • Population from the 2020 Census: 552 people
    • Mooresboro
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mooresboro have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mooresboro
      • Mooresboro is located in Cleveland County
      • Population from the 2020 Census: 316 people
    • Casar
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Casar
      • Casar is located in Cleveland County
      • Population from the 2020 Census: 292 people
      • Jump to TripAdvisor's Tourism page for Casar <4>
  • Henderson County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Bat Cave
      (8 miles [12.9 km] to the southwest)
    • Bearwallow
      (9 miles [14.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Bearwallow. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Bearwallow
      • Bearwallow is located in Henderson County
    • Gerton
      (10 miles [16.1 km] to the west)
      • Note: The GPS coordinates that we are using for Gerton have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gerton
      • Gerton is located in Henderson County
      • Jump to TripAdvisor's Tourism page for Gerton <4>
    • Baxter
      (16 miles [25.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Baxter. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Baxter
      • Baxter is located in Henderson County
    • Dana
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dana have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dana
      • Dana is located in Henderson County
    • U-No
      (17 miles [27.4 km] to the southwest)
      • Jump to our Gazetteer entry for U-No
      • U-No is located in Henderson County
    • Carolina Village
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Carolina Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carolina Village
      • Carolina Village is located in Henderson County
    • Cumberland Village
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Cumberland Village have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cumberland Village
      • Cumberland Village is located in Henderson County
    • Upward
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Upward
      • Upward is located in Henderson County
    • Balfour
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Balfour have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Balfour
      • Balfour is located in Henderson County
    • Barker Heights
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Barker Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barker Heights
      • Barker Heights is located in Henderson County
    • Fletcher
      (20 miles [32.2 km] to the west)
      • Note: The GPS coordinates that we are using for Fletcher have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fletcher
      • Fletcher is located in Henderson County
      • Population from the 2020 Census: 8,439 people
      • Jump to TripAdvisor's Tourism page for Fletcher <4>
  • Madison County
    • Ivy
      (29 miles [46.7 km] to the northwest)
      • Jump to our Gazetteer entry for Ivy
      • Ivy is located in Madison County
  • McDowell County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Moffitt Hill
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Moffitt Hill
      • Moffitt Hill is located in McDowell County
    • Lackey Town
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Lackey Town have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lackey Town
      • Lackey Town is located in McDowell County
    • Old Fort
      (8 miles [12.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Old Fort. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Old Fort
      • Old Fort is located in McDowell County
      • Population from the 2020 Census: 924 people
      • Jump to TripAdvisor's Tourism page for Old Fort <4>
    • Sugar Hill
      (8 miles [12.9 km] to the northeast)
      • Jump to our Gazetteer entry for Sugar Hill
      • Sugar Hill is located in McDowell County
    • Providence
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Providence
      • Providence is located in McDowell County
    • Dendron
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dendron have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dendron
      • Dendron is located in McDowell County
    • Vein Mountain
      (11 miles [17.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Vein Mountain. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Vein Mountain
      • Vein Mountain is located in McDowell County
    • Greenlee
      (11 miles [17.7 km] to the north)
      • Jump to our Gazetteer entry for Greenlee
      • Greenlee is located in McDowell County
    • Glenwood
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Glenwood have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glenwood
      • Glenwood is located in McDowell County
    • West Marion
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for West Marion have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Marion
      • West Marion is located in McDowell County
    • Marion
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marion
      • Marion is located in McDowell County
      • Population from the 2020 Census: 7,937 people
      • Jump to TripAdvisor's Tourism page for Marion <4>
    • Mountain Home ‑ Historic
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Mountain Home have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mountain Home
      • Mountain Home is located in McDowell County
  • Mitchell County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Grassy Creek
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Grassy Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grassy Creek
      • Grassy Creek is located in Mitchell County
    • Spruce Pine
      (28 miles [45.1 km] to the north)
    • Penland
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Penland have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Penland
      • Penland is located in Mitchell County
      • Jump to TripAdvisor's Tourism page for Penland <4>
  • Polk County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Mill Spring
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Mill Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mill Spring
      • Mill Spring is located in Polk County
      • Jump to TripAdvisor's Tourism page for Mill Spring <4>
    • Columbus
      (17 miles [27.4 km] to the south)
    • Lynn
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Lynn
      • Lynn is located in Polk County
    • Tryon
      (21 miles [33.8 km] to the south)
  • Yancey County
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Hamrick
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Hamrick
      • Hamrick is located in Yancey County
    • Murchison
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for Murchison
      • Murchison is located in Yancey County
    • Celo
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Celo
      • Celo is located in Yancey County
    • Pensacola
      (24 miles [38.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Pensacola. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Pensacola
      • Pensacola is located in Yancey County
    • Low Gap
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Low Gap
      • Low Gap is located in Yancey County
    • Concord
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Yancey County
    • Micaville
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Micaville
      • Micaville is located in Yancey County
      • Jump to TripAdvisor's Tourism page for Micaville <4>
    • Newdale
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Newdale
      • Newdale is located in Yancey County
    • Burnsville
      (29 miles [46.7 km] to the north)
  • Cherokee County (SC)
    • Chesnee
      (30 miles [48.3 km] to the southeast)
      • Jump to our Gazetteer entry for Chesnee
      • Chesnee is located in Cherokee County (SC)
      • Population from the 2020 Census: 942 people
      • Jump to TripAdvisor's Tourism page for Chesnee <4>
  • Greenville County (SC)
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Gowensville
      (27 miles [43.5 km] to the south)
      • Jump to our Gazetteer entry for Gowensville
      • Gowensville is located in Greenville County (SC)
    • Highland
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Highland
      • Highland is located in Greenville County (SC)
  • Spartanburg County (SC)
    • The following are listed by their distance from Jeter, with the one closest to Jeter listed first.
    • Landrum
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Landrum
      • Landrum is located in Spartanburg County (SC)
      • Population from the 2020 Census: 2,725 people
      • Jump to TripAdvisor's Tourism page for Landrum <4>
    • Brooklyn
      (26 miles [41.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Brooklyn. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Brooklyn
      • Brooklyn is located in Spartanburg County (SC)
    • Campobello
      (27 miles [43.5 km] to the south)
    • Fingerville
      (27 miles [43.5 km] to the south)
    • Gramling
      (29 miles [46.7 km] to the south)

For an expanded list of the communities that are closest to Jeter, see our County-by-County Page for Jeter.

Cemeteries Near Jeter ...

Below are cemeteries that are in the vicinity of Jeter.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Jeter covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Jeter, with the one closest to Jeter listed first.

  • Antioch Church Cemetery
    (2 miles [3.2 km] to the southeast)
  • Mt. Nebo Baptist Cemetery
    (3 miles [4.8 km] to the south)
  • Hemphill Morgan Cemetery
    (3 miles [4.8 km] to the east)
  • Montford Cove Baptist Church Cemetery
    (3 miles [4.8 km] to the east)
  • Mt. Pleasant Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Mt. Pleasant Cemetery
    • To give a relative sense of its location, the Mt. Pleasant Cemetery is located 4 miles [6.4 km]<6> to the southwest of Bat Cave.
  • Bills Creek Baptist Church Cemetery
    (4 miles [6.4 km] to the south)
  • St. Johns MB Church Cemetery
    (4 miles [6.4 km] to the southeast)
  • Davistown Cemetery
    (4 miles [6.4 km] to the north)
    • Jump to our Gazetteer entry for the Davistown Cemetery
    • Note: The GPS coordinates that we are using for the Davistown Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Temple of Jesus Cemetery
    (5 miles [8 km] to the south)
  • Pine Cove Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the Pine Cove Cemetery
    • Note: The GPS coordinates that we are using for the Pine Cove Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Full Gospel Revival Church Cemetery
    (6 miles [9.7 km] to the southeast)
  • Pleasant Grove Baptist Church Cemetery
    (6 miles [9.7 km] to the southeast)
  • Continue List   (368 more) ...
    • Piney Knob Baptist Church Cemetery
      (6 miles [9.7 km] to the southeast)
    • Hill Cemetery
      (8 miles [12.9 km] to the southwest)
      • Jump to our Gazetteer entry for the Hill Cemetery
      • Note: The GPS coordinates that we are using for the Hill Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Connor Cemetery
      (8 miles [12.9 km] to the southwest)
      • Jump to our Gazetteer entry for the Connor Cemetery
      • Note: The GPS coordinates that we are using for the Connor Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.

While we didn't find Jeter in the Atlas, the following 1895 communities would have been found near the current location of Jeter.

These communities are listed based on their distance from Jeter, with the one closest to Jeter listed first.

  • Otter Creek ‑ Historic
    (3 miles [4.8 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Otter Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Otter Creek
    • Otter Creek is located in Rutherford County
  • Uree
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Uree have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Uree
    • Uree is located in Rutherford County
  • Chimney Rock
    (6 miles [9.7 km] to the southwest)
  • Bat Cave
    (8 miles [12.9 km] to the southwest)
  • Poplar Grove
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Poplar Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Poplar Grove
    • Poplar Grove is located in Polk County
  • Cuba ‑ Historic
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Cuba have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cuba
    • Cuba is located in Rutherford County
  • Sugar Hill
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for Sugar Hill
    • Sugar Hill is located in McDowell County
  • Old Fort
    (8 miles [12.9 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Old Fort. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Old Fort
    • Old Fort is located in McDowell County
    • Population from the 2020 Census: 924 people
    • Jump to TripAdvisor's Tourism page for Old Fort <4>
  • Bearwallow
    (9 miles [14.5 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Bearwallow. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Bearwallow
    • Bearwallow is located in Henderson County
  • Green Hill
    (9 miles [14.5 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Green Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Green Hill
    • Green Hill is located in Rutherford County
  • Dendron
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dendron have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dendron
    • Dendron is located in McDowell County
  • Vein Mountain
    (11 miles [17.7 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Vein Mountain. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Vein Mountain
    • Vein Mountain is located in McDowell County
  • Continue List   (13 more) ...
    • Greenlee
      (11 miles [17.7 km] to the north)
      • Jump to our Gazetteer entry for Greenlee
      • Greenlee is located in McDowell County
    • Mack ‑ Historic
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mack have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mack
      • Mack is located in Rutherford County
    • Black Mountain
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Black Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Black Mountain
      • Black Mountain is located in Buncombe County
      • Population from the 2020 Census: 8,256 people
      • Jump to TripAdvisor's Tourism page for Black Mountain <4>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Jeter. See our List of 1890's Communities around Jeter.

Newspapers Published in Jeter ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 47 newspapers that have been published in the area around Jeter.

Although we're unaware of any newspapers that were published in the immediate area of Jeter, there are papers which were published within 20 miles [32.2 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Jeter.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Jeter:

The official website for Rutherford County: www.rutherfordcountync.gov/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jeter, please let us know so that we can improve our accuracy.
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Jeter) to Point B.Our distance measurements begin at a specific point in Jeter. The point we use is located at these GPS coordinates - Latitude: 35.5071, Longitude: -82.1587       In this case, the coordinates for Jeter have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025