RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Martin County >> Jamesville >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Jamesville had a population of 346 people in 1895 with a post office and railroad service. In 2020, Jamesville had a population of 440 people.

The following communities are listed based on their distance from Jamesville, with the one closest to Jamesville listed first.

  • Dardens
    (4 miles [6.4 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Dardens. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Dardens
    • Dardens is located in Martin County
    • Google driving directions:
    • From your current location to Dardens
    • From Jamesville to Dardens
  • Plymouth
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Plymouth have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plymouth
    • Plymouth is located in Washington County
    • Population from the 2020 Census: 3,332 people
    • Jump to TripAdvisor's Tourism page for Plymouth <4>
  • Sans Souci
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Sans Souci have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sans Souci
    • Sans Souci is located in Bertie County
  • Monticello ‑ Historic
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Monticello have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monticello
    • Monticello is located in Washington County
  • Williamston
    (9 miles [14.5 km] to the west)
  • Windsor
    (13 miles [20.9 km] to the north)
  • Everetts
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Everetts have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Everetts
    • Everetts is located in Martin County
    • Population from the 2020 Census: 138 people
  • Gaylord
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gaylord have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gaylord
    • Gaylord is located in Beaufort County
  • Roper
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Roper have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roper
    • Roper is located in Washington County
    • Population from the 2020 Census: 533 people
    • Jump to TripAdvisor's Tourism page for Roper <4>
  • Avoca
    (16 miles [25.7 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Avoca. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Avoca
    • Avoca is located in Bertie County
    • Google driving directions:
    • From your current location to Avoca
    • From Jamesville to Avoca
  • Drew
    (18 miles [29 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Drew. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Drew
    • Drew is located in Bertie County
    • Google driving directions:
    • From your current location to Drew
    • From Jamesville to Drew
  • Latham
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Latham have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Latham
    • Latham is located in Beaufort County
  • Bunyan
    (19 miles [30.6 km] to the south)
    • Note: The GPS coordinates that we are using for Bunyan have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bunyan
    • Bunyan is located in Beaufort County
  • Pungo
    (19 miles [30.6 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Pungo. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Pungo
    • Pungo is located in Beaufort County
    • Google driving directions:
    • From your current location to Pungo
    • From Jamesville to Pungo
  • Hamilton
    (19 miles [30.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hamilton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hamilton
    • Hamilton is located in Martin County
    • Population from the 2020 Census: 363 people
    • Jump to TripAdvisor's Tourism page for Hamilton <4>
  • Robersonville
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Robersonville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Robersonville
    • Robersonville is located in Martin County
    • Population from the 2020 Census: 1,322 people
    • Jump to TripAdvisor's Tourism page for Robersonville <4>
  • Washington
    (20 miles [32.2 km] to the southwest)
  • Pantego
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Pantego have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pantego
    • Pantego is located in Beaufort County
    • Population from the 2020 Census: 175 people
  • Pactolus
    (21 miles [33.8 km] to the southwest)
  • Yeatesville
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Yeatesville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Yeatesville
    • Yeatesville is located in Beaufort County
  • Skinnersville
    (21 miles [33.8 km] to the northeast)
  • Mount Gould
    (22 miles [35.4 km] to the north)
    • Note: The GPS coordinates that we are using for Mount Gould have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Gould
    • Mount Gould is located in Bertie County
  • Hassell
    (22 miles [35.4 km] to the west)
  • Grimesland
    (23 miles [37 km] to the southwest)
    • Note: The GPS coordinates that we are using for Grimesland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grimesland
    • Grimesland is located in Pitt County
    • Population from the 2020 Census: 441 people
  • Chocowinity
    (23 miles [37 km] to the southwest)
    • Note: The GPS coordinates that we are using for Chocowinity have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chocowinity
    • Chocowinity is located in Beaufort County
    • Population from the 2020 Census: 770 people
    • Jump to TripAdvisor's Tourism page for Chocowinity <4>
  • Edenton
    (23 miles [37 km] to the northeast)
  • Parmele
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Parmele have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parmele
    • Parmele is located in Martin County
    • Population from the 2020 Census: 253 people

Unfortunately, we don't know of an official website for Jamesville. If you can help, please contact us through our Feedback Page.

The official website for Martin County: www.martincountyncgov.com

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Jamesville, please let us know so that we can improve our accuracy.
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025