|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Icard in the Atlas, the following communities of the 1890's would have been found near the current location of Icard. The following communities are listed based on their distance, with the one closest to Icard listed first.
- Connelly Springs
(2 miles [3.2 km] to the west)
- Penelope
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Penelope have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Penelope
- Penelope is located in Burke County
- Rutherford College
(3 miles [4.8 km] to the northwest)
- Granite Falls
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Granite Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Granite Falls
- Granite Falls is located in Caldwell County
- Population from the 2020 Census: 4,657 people
- Jump to TripAdvisor's Tourism page for Granite Falls <2>
- Baton
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Baton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baton
- Baton is located in Caldwell County
- Sawmills
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Sawmills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sawmills
- Sawmills is located in Caldwell County
- Population from the 2020 Census: 5,156 people
- Hickory
(7 miles [11.3 km] to the east)
- Drexel
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Drexel have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Drexel
- Drexel is located in Burke County
- Population from the 2020 Census: 1,861 people
- Hudson
(8 miles [12.9 km] to the north)
- Petra Mills
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Petra Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petra Mills
- Petra Mills is located in Caldwell County
- Shoups Ford
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Shoups Ford. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Shoups Ford
- Shoups Ford is located in Burke County
- Google driving directions:
- From your current location to Shoups Ford
- From Icard to Shoups Ford
- Enola
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Enola. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Enola
- Enola is located in Burke County
- Google driving directions:
- From your current location to Enola
- From Icard to Enola
- Camp Creek
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Camp Creek. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Camp Creek
- Camp Creek is located in Burke County
- Google driving directions:
- From your current location to Camp Creek
- From Icard to Camp Creek
- Henry
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Henry. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Henry
- Henry is located in Lincoln County
- Google driving directions:
- From your current location to Henry
- From Icard to Henry
- Plateau
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Plateau. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Plateau
- Plateau is located in Catawba County
- Google driving directions:
- From your current location to Plateau
- From Icard to Plateau
- Blackburn
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Blackburn. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Blackburn
- Blackburn is located in Catawba County
- Google driving directions:
- From your current location to Blackburn
- From Icard to Blackburn
- Gamewell
(11 miles [17.7 km] to the northwest)
- Startown
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Startown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Startown
- Startown is located in Catawba County
- Downsville ‑ Historic
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Downsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downsville
- Downsville is located in Caldwell County
- Cedar Valley
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Valley
- Cedar Valley is located in Caldwell County
- Chesterfield
(12 miles [19.3 km] to the northwest)
- Morganton
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Morganton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morganton
- Morganton is located in Burke County
- Population from the 2020 Census: 16,625 people
- Jump to TripAdvisor's Tourism page for Morganton <2>
- Lenoir
(13 miles [20.9 km] to the north)
- Toluca
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Toluca have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toluca
- Toluca is located in Cleveland County
- Hartland
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Hartland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hartland
- Hartland is located in Caldwell County
Off-the-Road Links ...
The official website for Burke County: www.co.burke.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Icard, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|