TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Forest City. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Forest City.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Forest City - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 56 communities listed:
- Arcadia
(27 miles [43.5 km] to the south)
- Bat Cave
(25 miles [40.2 km] to the west)
- Blacksburg
(24 miles [38.6 km] to the southeast)
- Boiling Springs
(12 miles [19.3 km] to the southeast)
- Boiling Springs
(20 miles [32.2 km] to the south)
- Bostic
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bostic
- Bostic is located in Rutherford County
- Population from the 2020 Census: 379 people
- Jump to TripAdvisor's Tourism page for Bostic <2>
- Campobello
(22 miles [35.4 km] to the southwest)
- Casar
(18 miles [29 km] to the northeast)
- Cherryville
(27 miles [43.5 km] to the east)
- Chesnee
(12 miles [19.3 km] to the south)
- Chimney Rock
(22 miles [35.4 km] to the west)
- Clifton
(24 miles [38.6 km] to the south)
- Columbus
(19 miles [30.6 km] to the west)
- Converse
(23 miles [37 km] to the south)
- Cowpens
(22 miles [35.4 km] to the south)
- Jump to our Gazetteer entry for Cowpens
- Cowpens is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,465 people
- Jump to TripAdvisor's Tourism page for Cowpens <2>
- Drayton
(25 miles [40.2 km] to the south)
- Ellenboro
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Ellenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellenboro
- Ellenboro is located in Rutherford County
- Population from the 2020 Census: 830 people
- Jump to TripAdvisor's Tourism page for Ellenboro <2>
- Fairforest
(27 miles [43.5 km] to the south)
- Fallston
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Fallston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fallston
- Fallston is located in Cleveland County
- Population from the 2020 Census: 610 people
- Jump to TripAdvisor's Tourism page for Fallston <2>
- Fingerville
(15 miles [24.1 km] to the southwest)
- Gaffney
(21 miles [33.8 km] to the southeast)
- Gerton
(28 miles [45.1 km] to the west)
- Note: The GPS coordinates that we are using for Gerton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gerton
- Gerton is located in Henderson County
- Jump to TripAdvisor's Tourism page for Gerton <2>
- Glen Alpine
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Glen Alpine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Alpine
- Glen Alpine is located in Burke County
- Population from the 2020 Census: 1,487 people
- Jump to TripAdvisor's Tourism page for Glen Alpine <2>
- Glendale
(26 miles [41.8 km] to the south)
- Gramling
(23 miles [37 km] to the southwest)
- Grover
(25 miles [40.2 km] to the southeast)
- Inman
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Inman
- Inman is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,480 people
- Jump to TripAdvisor's Tourism page for Inman <2>
- Kings Creek
(30 miles [48.3 km] to the southeast)
- Kings Mountain
(30 miles [48.3 km] to the east)
- Lake Lure
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Lure
- Lake Lure is located in Rutherford County
- Population from the 2020 Census: 1,153 people
- Jump to TripAdvisor's Tourism page for Lake Lure <2>
- Landrum
(21 miles [33.8 km] to the southwest)
- Jump to our Gazetteer entry for Landrum
- Landrum is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,725 people
- Jump to TripAdvisor's Tourism page for Landrum <2>
- Lawndale
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Lawndale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawndale
- Lawndale is located in Cleveland County
- Population from the 2020 Census: 589 people
- Jump to TripAdvisor's Tourism page for Lawndale <2>
- Lyman
(30 miles [48.3 km] to the southwest)
- Jump to our Gazetteer entry for Lyman
- Lyman is located in Spartanburg County (SC)
- Population from the 2020 Census: 3,796 people
- Jump to TripAdvisor's Tourism page for Lyman <2>
- Marion
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in McDowell County
- Population from the 2020 Census: 7,937 people
- Jump to TripAdvisor's Tourism page for Marion <2>
- Mayo
(17 miles [27.4 km] to the south)
- Mill Spring
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Mill Spring have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Spring
- Mill Spring is located in Polk County
- Jump to TripAdvisor's Tourism page for Mill Spring <2>
- Morganton
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Morganton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morganton
- Morganton is located in Burke County
- Population from the 2020 Census: 16,625 people
- Jump to TripAdvisor's Tourism page for Morganton <2>
- Nebo
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Nebo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nebo
- Nebo is located in McDowell County
- Jump to TripAdvisor's Tourism page for Nebo <2>
- Old Fort
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Old Fort have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Fort
- Old Fort is located in McDowell County
- Population from the 2020 Census: 924 people
- Jump to TripAdvisor's Tourism page for Old Fort <2>
- Pacolet Mills
(29 miles [46.7 km] to the south)
- Pacolet
(30 miles [48.3 km] to the south)
- Jump to our Gazetteer entry for Pacolet
- Pacolet is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,604 people
- Jump to TripAdvisor's Tourism page for Pacolet <2>
- Ridgecrest
(30 miles [48.3 km] to the northwest)
- Rutherfordton
(5 miles [8 km] to the northwest)
- Saluda
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Saluda have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saluda
- Saluda is located in Henderson County
- Population from the 2020 Census: 703 people
- Jump to TripAdvisor's Tourism page for Saluda <2>
- Shelby
(18 miles [29 km] to the east)
- Southern Shops
(25 miles [40.2 km] to the south)
- Spartanburg
(26 miles [41.8 km] to the south)
- Spindale
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spindale
- Spindale is located in Rutherford County
- Population from the 2020 Census: 4,175 people
- Jump to TripAdvisor's Tourism page for Spindale <2>
- Startex
(30 miles [48.3 km] to the southwest)
- Tryon
(22 miles [35.4 km] to the southwest)
- Una
(25 miles [40.2 km] to the south)
- Union Mills
(12 miles [19.3 km] to the northwest)
- Vale
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Vale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vale
- Vale is located in Lincoln County
- Jump to TripAdvisor's Tourism page for Vale <2>
- Valley Falls
(22 miles [35.4 km] to the south)
- Wellford
(29 miles [46.7 km] to the southwest)
- White Stone
(29 miles [46.7 km] to the south)
Off-the-Road Links ...
The official website for Forest City: www.townofforestcity.com/
The official website for Rutherford County: www.rutherfordcountync.gov/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Forest City) to Point B.Our distance measurements begin at a specific point in Forest City. The point we use is located at these GPS coordinates - Latitude: 35.3338, Longitude: -81.8650 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |