|
TripAdvisor Links
Introduction ...
When we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
While we are unaware of a TripAdvisor Tourism page that is specific to Erwinsville, there are nearby communities that are likely to provide the information that you're looking for. If you want to learn more about those communities, the following list should be of help.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Erwinsville - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 54 communities listed:
- Arcadia
(26 miles [41.8 km] to the southwest)
- Bessemer City
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Bessemer City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bessemer City
- Bessemer City is located in Gaston County
- Population from the 2020 Census: 5,645 people
- Jump to TripAdvisor's Tourism page for Bessemer City <2>
- Blacksburg
(7 miles [11.3 km] to the southeast)
- Boiling Springs
(5 miles [8 km] to the northwest)
- Boiling Springs
(22 miles [35.4 km] to the southwest)
- Bostic
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bostic
- Bostic is located in Rutherford County
- Population from the 2020 Census: 379 people
- Jump to TripAdvisor's Tourism page for Bostic <2>
- Bowling Green
(23 miles [37 km] to the east)
- Campobello
(30 miles [48.3 km] to the west)
- Casar
(22 miles [35.4 km] to the north)
- Cherryville
(19 miles [30.6 km] to the northeast)
- Chesnee
(13 miles [20.9 km] to the west)
- Clifton
(18 miles [29 km] to the southwest)
- Clover
(22 miles [35.4 km] to the east)
- Converse
(18 miles [29 km] to the southwest)
- Cowpens
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Cowpens
- Cowpens is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,465 people
- Jump to TripAdvisor's Tourism page for Cowpens <2>
- Dallas
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Gaston County
- Population from the 2020 Census: 4,851 people
- Jump to TripAdvisor's Tourism page for Dallas <2>
- Drayton
(21 miles [33.8 km] to the southwest)
- Ellenboro
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Ellenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellenboro
- Ellenboro is located in Rutherford County
- Population from the 2020 Census: 830 people
- Jump to TripAdvisor's Tourism page for Ellenboro <2>
- Fairforest
(26 miles [41.8 km] to the southwest)
- Fallston
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Fallston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fallston
- Fallston is located in Cleveland County
- Population from the 2020 Census: 610 people
- Jump to TripAdvisor's Tourism page for Fallston <2>
- Fingerville
(21 miles [33.8 km] to the west)
- Forest City
(17 miles [27.4 km] to the northwest)
- Gaffney
(7 miles [11.3 km] to the south)
- Gastonia
(25 miles [40.2 km] to the east)
- Glendale
(20 miles [32.2 km] to the southwest)
- Gramling
(29 miles [46.7 km] to the west)
- Grover
(9 miles [14.5 km] to the east)
- Hickory Grove
(18 miles [29 km] to the southeast)
- Inman
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Inman
- Inman is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,480 people
- Jump to TripAdvisor's Tourism page for Inman <2>
- Jonesville
(24 miles [38.6 km] to the south)
- Kings Creek
(12 miles [19.3 km] to the southeast)
- Kings Mountain
(16 miles [25.7 km] to the east)
- Lawndale
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Lawndale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawndale
- Lawndale is located in Cleveland County
- Population from the 2020 Census: 589 people
- Jump to TripAdvisor's Tourism page for Lawndale <2>
- Lincolnton
(28 miles [45.1 km] to the northeast)
- Lockhart
(28 miles [45.1 km] to the south)
- Lowell
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowell
- Lowell is located in Gaston County
- Population from the 2020 Census: 3,744 people
- Jump to TripAdvisor's Tourism page for Lowell <2>
- Mayo
(14 miles [22.5 km] to the southwest)
- Pacolet Mills
(19 miles [30.6 km] to the south)
- Pacolet
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Pacolet
- Pacolet is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,604 people
- Jump to TripAdvisor's Tourism page for Pacolet <2>
- Pauline
(28 miles [45.1 km] to the southwest)
- Roebuck
(28 miles [45.1 km] to the southwest)
- Rutherfordton
(22 miles [35.4 km] to the northwest)
- Sharon
(22 miles [35.4 km] to the southeast)
- Shelby
(8 miles [12.9 km] to the northeast)
- Smyrna
(15 miles [24.1 km] to the southeast)
- Southern Shops
(25 miles [40.2 km] to the southwest)
- Spartanburg
(23 miles [37 km] to the southwest)
- Spindale
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spindale
- Spindale is located in Rutherford County
- Population from the 2020 Census: 4,175 people
- Jump to TripAdvisor's Tourism page for Spindale <2>
- Una
(24 miles [38.6 km] to the southwest)
- Union Mills
(28 miles [45.1 km] to the northwest)
- Vale
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Vale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vale
- Vale is located in Lincoln County
- Jump to TripAdvisor's Tourism page for Vale <2>
- Valley Falls
(23 miles [37 km] to the southwest)
- White Stone
(22 miles [35.4 km] to the southwest)
- York
(25 miles [40.2 km] to the southeast)
Off-the-Road Links ...
The official website for Cleveland County: www.clevelandcounty.com/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Erwinsville) to Point B.Our distance measurements begin at a specific point in Erwinsville. The point we use is located at these GPS coordinates - Latitude: 35.1843, Longitude: -81.6229 In this case, the coordinates for Erwinsville have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|