Welcome to Danieltown ...
Danieltown is located in Rutherford County<1>.
Danieltown is 990 feet [302 m] above sea level.<2>.
Time Zone: Danieltown lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
Area Code for Danieltown: 828
Communities Also Named Danieltown ...
Using our Gazetteer, we found another community named Danieltown - it's located in Virginia.
For more information, see our Tidbits & Trivia Page for Danieltown.
Communities near Danieltown ...
We have created a list of 10 communities that are near Danieltown.
- Forest City
(3 miles [4.8 km] to the northeast)
- Boiling Springs
(14 miles [22.5 km] to the east)
- Spindale
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spindale
- Spindale is located in Rutherford County
- Population from the 2020 Census: 4,175 people
- Jump to TripAdvisor's Tourism page for Spindale <3>
- Rutherfordton
(5 miles [8 km] to the northwest)
- Landrum
(17 miles [27.4 km] to the southwest)
- Jump to our Gazetteer entry for Landrum
- Landrum is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,725 people
- Jump to TripAdvisor's Tourism page for Landrum <3>
- Inman
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Inman
- Inman is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,480 people
- Jump to TripAdvisor's Tourism page for Inman <3>
- Cowpens
(19 miles [30.6 km] to the south)
- Jump to our Gazetteer entry for Cowpens
- Cowpens is located in Spartanburg County (SC)
- Population from the 2020 Census: 2,465 people
- Jump to TripAdvisor's Tourism page for Cowpens <3>
- Tryon
(19 miles [30.6 km] to the west)
- Lake Lure
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Lake Lure have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Lure
- Lake Lure is located in Rutherford County
- Population from the 2020 Census: 1,153 people
- Jump to TripAdvisor's Tourism page for Lake Lure <3>
- Columbus
(16 miles [25.7 km] to the west)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Danieltown. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Danieltown.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Danieltown. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Danieltown.
We also have a detailed list of newspapers that have been published in the area around Danieltown. See our Newspapers Page for Danieltown.
TripAdvisor Tourism Pages for Danieltown ...
Looking for more information about Danieltown? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Danieltown, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Danieltown.
Footnotes ...
| <1> | If you're interested in how the shape of North Carolina's counties, including Rutherford, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Danieltown - it will be higher in some places and lower in others. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |