RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Yancey County >> Wilson Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Carolina

The Commemorative Quarter for North Carolina





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Wilson Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Wilson Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Wilson Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Micaville
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Micaville
    • Micaville is located in Yancey County
    • Jump to TripAdvisor's Tourism page for Micaville <3>
  • Newdale
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for Newdale
    • Newdale is located in Yancey County
  • Celo
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for Celo
    • Celo is located in Yancey County
  • Double Island
    (3 miles [4.8 km] to the north)
    • Jump to our Gazetteer entry for Double Island
    • Double Island is located in Yancey County
  • Low Gap
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for Low Gap
    • Low Gap is located in Yancey County
  • Penland
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Penland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penland
    • Penland is located in Mitchell County
    • Jump to TripAdvisor's Tourism page for Penland <3>
  • Burnsville
    (5 miles [8 km] to the west)
  • Hamrick
    (6 miles [9.7 km] to the south)
    • Jump to our Gazetteer entry for Hamrick
    • Hamrick is located in Yancey County
  • Green Mountain
    (6 miles [9.7 km] to the northwest)
  • Concord
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Concord
    • Concord is located in Yancey County
  • Red Hill
    (7 miles [11.3 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Red Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Red Hill
    • Red Hill is located in Mitchell County
  • Pensacola
    (7 miles [11.3 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Pensacola. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Pensacola
    • Pensacola is located in Yancey County
  • Little Switzerland
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Little Switzerland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little Switzerland
    • Little Switzerland is located in McDowell County
    • Jump to TripAdvisor's Tourism page for Little Switzerland <3>
  • Spruce Pine
    (7 miles [11.3 km] to the east)
  • Bakersville
    (7 miles [11.3 km] to the north)
  • Day Book
    (7 miles [11.3 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Day Book. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Day Book
    • Day Book is located in Yancey County
  • Murchison
    (8 miles [12.9 km] to the southwest)
    • Jump to our Gazetteer entry for Murchison
    • Murchison is located in Yancey County
  • Grassy Creek
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Grassy Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grassy Creek
    • Grassy Creek is located in Mitchell County
  • Tipton Hill
    (9 miles [14.5 km] to the northwest)
    • Jump to our Gazetteer entry for Tipton Hill
    • Tipton Hill is located in Mitchell County
  • Relief
    (10 miles [16.1 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Relief. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Relief
    • Relief is located in Mitchell County
  • Ramseytown
    (10 miles [16.1 km] to the northwest)
    • Jump to our Gazetteer entry for Ramseytown
    • Ramseytown is located in Yancey County
  • Higgins
    (10 miles [16.1 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Higgins. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Higgins
    • Higgins is located in Yancey County
  • Bailey
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bailey
    • Bailey is located in Mitchell County
  • Sioux
    (11 miles [17.7 km] to the northwest)
    • Jump to our Gazetteer entry for Sioux
    • Sioux is located in Yancey County
  • Richlands
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richlands
    • Richlands is located in Mitchell County
  • Plumtree
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Plumtree have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plumtree
    • Plumtree is located in Avery County
    • Jump to TripAdvisor's Tourism page for Plumtree <3>
  • Buladean
    (13 miles [20.9 km] to the north)
    • Jump to our Gazetteer entry for Buladean
    • Buladean is located in Mitchell County

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Wilson Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.9112, Longitude: -82.2029       In this case, the coordinates for the Wilson Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 17 Jan 2025