|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Williams Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Williams Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Williams Cemetery. We've listed the following communities based on their distance, with the closest first.
- Fairfield
(2 miles [3.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Fairfield. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Union County
- Wingate
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Wingate have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wingate
- Wingate is located in Union County
- Population from the 2020 Census: 4,724 people
- Jump to TripAdvisor's Tourism page for Wingate <4>
- Unionville
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Unionville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Unionville
- Unionville is located in Union County
- Population from the 2020 Census: 7,344 people
- Marshville
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Marshville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marshville
- Marshville is located in Union County
- Population from the 2020 Census: 2,835 people
- Jump to TripAdvisor's Tourism page for Marshville <4>
- Monroe
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Union County
- Population from the 2020 Census: 35,668 people
- Jump to TripAdvisor's Tourism page for Monroe <4>
- Rock Rest
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Rock Rest
- Rock Rest is located in Union County
- Fairview
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Union County
- Population from the 2020 Census: 3,984 people
- Carmel Village
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Carmel Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carmel Village
- Carmel Village is located in Union County
- Allens Crossroads
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Allens Crossroads
- Allens Crossroads is located in Union County
- Peachland
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Peachland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peachland
- Peachland is located in Anson County
- Population from the 2020 Census: 402 people
- Jump to TripAdvisor's Tourism page for Peachland <4>
- Burnsville
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Burnsville
- Burnsville is located in Anson County
- Stanfield
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Stanfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanfield
- Stanfield is located in Stanly County
- Population from the 2020 Census: 1,552 people
- Jump to TripAdvisor's Tourism page for Stanfield <4>
- Hemby Bridge
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Hemby Bridge
- Hemby Bridge is located in Union County
- Population from the 2020 Census: 1,846 people
- Lake Park
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Lake Park
- Lake Park is located in Union County
- Population from the 2020 Census: 3,999 people
- Oakboro
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Oakboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakboro
- Oakboro is located in Stanly County
- Population from the 2020 Census: 1,928 people
- Jump to TripAdvisor's Tourism page for Oakboro <4>
- Mineral Springs
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mineral Springs. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Mineral Springs
- Mineral Springs is located in Anson County
- Midland
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Cabarrus County
- Population from the 2020 Census: 3,880 people
- Jump to TripAdvisor's Tourism page for Midland <4>
- Polkton
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Polkton
- Polkton is located in Anson County
- Population from the 2020 Census: 2,288 people
- Sugar Town
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Sugar Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugar Town
- Sugar Town is located in Anson County
- Locust
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Locust have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust
- Locust is located in Stanly County
- Population from the 2020 Census: 3,270 people
- Jump to TripAdvisor's Tourism page for Locust <4>
- Stallings
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Stallings have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stallings
- Stallings is located in Union County
- Population from the 2020 Census: 16,456 people
- Jump to TripAdvisor's Tourism page for Stallings <4>
- Indian Trail
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Indian Trail. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Indian Trail
- Indian Trail is located in Union County
- Population from the 2020 Census: 41,040 people
- Jump to TripAdvisor's Tourism page for Indian Trail <4>
- Altan
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Altan
- Altan is located in Union County
- Red Cross
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Red Cross have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Cross
- Red Cross is located in Stanly County
- Population from the 2020 Census: 769 people
- Mint Hill
(14 miles [22.5 km] to the northwest)
Off-the-Road Links ...
The official website for Union County: www.co.union.nc.us/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Williams Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.0696, Longitude: -80.4256 In this case, the coordinates for the Williams Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|