RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Robeson County >> Thomas Cemetery >> Nearby CommunitiesIndex...

Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Thomas Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Thomas Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Thomas Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Rozier Siding ‑ Historic
    (Less than 2 miles to the north)
    • Note: We haven't been able to verify our GPS coordinates for Rozier Siding. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Rozier Siding
    • Rozier Siding is located in Robeson County
  • Saddletree
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for Saddletree
    • Saddletree is located in Robeson County
  • Barker Ten Mile
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barker Ten Mile
    • Barker Ten Mile is located in Robeson County
  • Saint Pauls
    (5 miles [8 km] to the north)
  • Lumberton
    (7 miles [11.3 km] to the south)
    • Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Lumberton
    • Lumberton is located in Robeson County
    • Population from the 2020 Census: 20,239 people
    • Jump to TripAdvisor's Tourism page for Lumberton <4>
  • Rennert
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rennert
    • Rennert is located in Robeson County
    • Population from the 2020 Census: 373 people
  • Lowe
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lowe have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lowe
    • Lowe is located in Robeson County
  • Allenton
    (9 miles [14.5 km] to the south)
    • Jump to our Gazetteer entry for Allenton
    • Allenton is located in Robeson County
  • Rex
    (9 miles [14.5 km] to the northwest)
    • Jump to our Gazetteer entry for Rex
    • Rex is located in Robeson County
  • Tar Heel
    (10 miles [16.1 km] to the east)
  • Philadelphus
    (11 miles [17.7 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Philadelphus. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Philadelphus
    • Philadelphus is located in Robeson County
  • Parkton
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parkton
    • Parkton is located in Robeson County
    • Population from the 2020 Census: 430 people
    • Jump to TripAdvisor's Tourism page for Parkton <4>
  • Lumber Bridge
    (12 miles [19.3 km] to the northwest)
    • Jump to our Gazetteer entry for Lumber Bridge
    • Lumber Bridge is located in Robeson County
    • Population from the 2020 Census: 87 people
  • Shannon
    (12 miles [19.3 km] to the northwest)
    • Jump to our Gazetteer entry for Shannon
    • Shannon is located in Robeson County
  • Pembroke
    (13 miles [20.9 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Pembroke. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Pembroke
    • Pembroke is located in Robeson County
    • Population from the 2020 Census: 2,942 people
    • Jump to TripAdvisor's Tourism page for Pembroke <4>
  • Butters
    (13 miles [20.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Butters have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Butters
    • Butters is located in Bladen County
  • Red Springs
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Red Springs
    • Red Springs is located in Robeson County
    • Population from the 2020 Census: 3,237 people
    • Jump to TripAdvisor's Tourism page for Red Springs <4>
  • Pates
    (14 miles [22.5 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Pates. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Pates
    • Pates is located in Robeson County
  • Dublin
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dublin
    • Dublin is located in Bladen County
    • Population from the 2020 Census: 328 people
  • White Oak
    (14 miles [22.5 km] to the east)
  • Prospect
    (14 miles [22.5 km] to the west)
    • Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prospect
    • Prospect is located in Robeson County
  • Jerome
    (15 miles [24.1 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Jerome
    • Jerome is located in Bladen County
  • Raynham
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Raynham have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Raynham
    • Raynham is located in Robeson County
    • Population from the 2020 Census: 68 people
  • McDonald
    (16 miles [25.7 km] to the southwest)
    • Jump to our Gazetteer entry for McDonald
    • McDonald is located in Robeson County
    • Population from the 2020 Census: 107 people
  • Bladenboro
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bladenboro
    • Bladenboro is located in Bladen County
    • Population from the 2020 Census: 1,697 people
    • Jump to TripAdvisor's Tourism page for Bladenboro <4>
  • Ruskin
    (16 miles [25.7 km] to the east)
    • Jump to our Gazetteer entry for Ruskin
    • Ruskin is located in Bladen County
  • Timberlake
    (16 miles [25.7 km] to the north)
    • Note: The GPS coordinates that we are using for Timberlake have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Timberlake
    • Timberlake is located in Cumberland County
  • Ardulusa
    (16 miles [25.7 km] to the north)
    • Jump to our Gazetteer entry for Ardulusa
    • Ardulusa is located in Cumberland County
  • Hope Mills
    (16 miles [25.7 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Hope Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Hope Mills
    • Hope Mills is located in Cumberland County
    • Population from the 2020 Census: 15,848 people
    • Jump to TripAdvisor's Tourism page for Hope Mills <4>
  • Red Banks
    (16 miles [25.7 km] to the west)
    • Jump to our Gazetteer entry for Red Banks
    • Red Banks is located in Robeson County

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Thomas Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.7302, Longitude: -78.9689       In this case, the coordinates for the Thomas Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.