Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Singletary Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Singletary Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Singletary Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Butters
(Less than 2 miles to the southeast) - Bladenboro
(3 miles [4.8 km] to the southeast)- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <3>
- Allenton
(4 miles [6.4 km] to the northwest)- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Abbottsburg
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Abbottsburg
- Abbottsburg is located in Bladen County
- Dublin
(9 miles [14.5 km] to the northeast) - Lumberton
(9 miles [14.5 km] to the northwest)- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Boardman
(10 miles [16.1 km] to the southwest) - Mount Olive
(10 miles [16.1 km] to the south)- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Columbus County
- Barker Ten Mile
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Proctorville
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Population from the 2020 Census: 119 people
- Orrum
(11 miles [17.7 km] to the southwest) - Evergreen
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Columbus County
- Clarkton
(12 miles [19.3 km] to the southeast)- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Population from the 2020 Census: 741 people
- Jump to TripAdvisor's Tourism page for Clarkton <3>
- Tar Heel
(12 miles [19.3 km] to the north)- Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <3>
- Williamson Crossroads
(14 miles [22.5 km] to the south)- Jump to our Gazetteer entry for Williamson Crossroads
- Williamson Crossroads is located in Columbus County
- Rozier Siding ‑ Historic
(14 miles [22.5 km] to the northwest)- Note: The GPS coordinates that we are using for Rozier Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Elizabethtown
(14 miles [22.5 km] to the east)- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <3>
- Yorick
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Yorick
- Yorick is located in Bladen County
- Ruskin
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Ruskin
- Ruskin is located in Bladen County
- Saddletree
(14 miles [22.5 km] to the northwest)- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Fairmont
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Fairmont
- Fairmont is located in Robeson County
- Population from the 2020 Census: 2,580 people
- Jump to TripAdvisor's Tourism page for Fairmont <3>
- Barnesville
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Barnesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnesville
- Barnesville is located in Robeson County
- Rico
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for Rico
- Rico is located in Columbus County
- Mount Olive
(15 miles [24.1 km] to the east)- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Bladen County
- White Oak
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for White Oak
- White Oak is located in Bladen County
- Jump to TripAdvisor's Tourism page for White Oak <3>
Off-the-Road Links ...
The official website for Bladen County: www.bladeninfo.net/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Singletary Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.5638, Longitude: -78.8564 In this case, the coordinates for the Singletary Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |