|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pleasant Grove Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pleasant Grove Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pleasant Grove Cemetery. We've listed the following communities based on their distance, with the closest first.
- Wendell
(Less than 2 miles to the west)
- Zebulon
(3 miles [4.8 km] to the north)
- Eagle Rock
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Eagle Rock. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Eagle Rock
- Eagle Rock is located in Wake County
- Shotwell
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Shotwell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Shotwell
- Shotwell is located in Wake County
- Archer Lodge
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Archer Lodge
- Archer Lodge is located in Johnston County
- Population from the 2020 Census: 5,322 people
- Archer Lodge has also been known as:
- Archer
- Rogers Crossroads
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rogers Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rogers Crossroads
- Rogers Crossroads is located in Nash County
- Murraytown
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Murraytown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Murraytown
- Murraytown is located in Nash County
- Middlesex
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Middlesex have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middlesex
- Middlesex is located in Nash County
- Population from the 2020 Census: 834 people
- Union Hope
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Union Hope
- Union Hope is located in Nash County
- Rocky Cross
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Rocky Cross have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Cross
- Rocky Cross is located in Nash County
- Knightdale
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Knightdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knightdale
- Knightdale is located in Wake County
- Population from the 2020 Census: 18,122 people
- Jump to TripAdvisor's Tourism page for Knightdale <2>
- Samaria
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Samaria have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Samaria
- Samaria is located in Nash County
- Sutton
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Sutton
- Sutton is located in Franklin County
- Clayton
(11 miles [17.7 km] to the southwest)
- Rolesville
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Rolesville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolesville
- Rolesville is located in Wake County
- Population from the 2020 Census: 8,882 people
- Jump to TripAdvisor's Tourism page for Rolesville <2>
- Emerald Village
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Emerald Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emerald Village
- Emerald Village is located in Wake County
- Bailey
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bailey
- Bailey is located in Nash County
- Population from the 2020 Census: 569 people
- Jump to TripAdvisor's Tourism page for Bailey <2>
- Mount Pleasant
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Pleasant
- Mount Pleasant is located in Nash County
- Frazier Crossroads
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Frazier Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Frazier Crossroads
- Frazier Crossroads is located in Nash County
- Gold Valley Crossroads
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gold Valley Crossroads. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gold Valley Crossroads
- Gold Valley Crossroads is located in Nash County
- Auburn
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Auburn
- Auburn is located in Wake County
- Wilson's Mills
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Wilson's Mills
- Wilson's Mills is located in Johnston County
- Population from the 2020 Census: 2,847 people
- Bunn
(13 miles [20.9 km] to the north)
- Floods Chapel
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Floods Chapel have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Floods Chapel
- Floods Chapel is located in Nash County
- Skycrest Village
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Skycrest Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skycrest Village
- Skycrest Village is located in Wake County
- Timberlake
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Timberlake have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timberlake
- Timberlake is located in Wake County
Off-the-Road Links ...
The official website for Wake County: www.wakegov.com/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pleasant Grove Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.7802, Longitude: -78.3353 In this case, the coordinates for the Pleasant Grove Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|