|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Phillips Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Phillips Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Phillips Cemetery. We've listed the following communities based on their distance, with the closest first.
- Red Hill
(Less than 2 miles to the west)
- Note: We haven't been able to verify our GPS coordinates for Red Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Red Hill
- Red Hill is located in Mitchell County
- Herrell ‑ Historic
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Herrell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Herrell
- Herrell is located in Mitchell County
- Green Mountain
(3 miles [4.8 km] to the southwest)
- Bakersville
(3 miles [4.8 km] to the east)
- Little Rock Creek ‑ Historic
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Little Rock Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Rock Creek
- Little Rock Creek is located in Mitchell County
- Tipton Hill
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Tipton Hill
- Tipton Hill is located in Mitchell County
- Double Island
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for Double Island
- Double Island is located in Yancey County
- Relief
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Relief. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Relief
- Relief is located in Mitchell County
- Day Book
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Day Book. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Day Book
- Day Book is located in Yancey County
- Buladean
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Buladean
- Buladean is located in Mitchell County
- Bailey
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Bailey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bailey
- Bailey is located in Mitchell County
- Micaville
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Micaville
- Micaville is located in Yancey County
- Jump to TripAdvisor's Tourism page for Micaville <4>
- Newdale
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Newdale
- Newdale is located in Yancey County
- Richlands
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Richlands have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Richlands
- Richlands is located in Mitchell County
- Burnsville
(8 miles [12.9 km] to the southwest)
- Penland
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Penland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Penland
- Penland is located in Mitchell County
- Jump to TripAdvisor's Tourism page for Penland <4>
- Sioux
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Sioux
- Sioux is located in Yancey County
- Ramseytown
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Ramseytown
- Ramseytown is located in Yancey County
- Higgins
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Higgins. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Higgins
- Higgins is located in Yancey County
- Spruce Pine
(10 miles [16.1 km] to the southeast)
- Burbank
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Burbank. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Burbank
- Burbank is located in Carter County (TN)
- Limestone Cove
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Limestone Cove. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Limestone Cove
- Limestone Cove is located in Unicoi County (TN)
- Concord
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Concord
- Concord is located in Yancey County
- Low Gap
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Low Gap
- Low Gap is located in Yancey County
- Celo
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Celo
- Celo is located in Yancey County
- Tolley Town
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Tolley Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tolley Town
- Tolley Town is located in Carter County (TN)
- Plumtree
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Plumtree have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plumtree
- Plumtree is located in Avery County
- Jump to TripAdvisor's Tourism page for Plumtree <4>
Off-the-Road Links ...
The official website for Mitchell County: www.mitchellcounty.org/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Phillips Cemetery. The point we use is located at these GPS coordinates - Latitude: 36.0196, Longitude: -82.2129 In this case, the coordinates for the Phillips Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|