Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Oxendine Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Oxendine Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Oxendine Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Philadelphus
(3 miles [4.8 km] to the northwest)- Note: The GPS coordinates that we are using for Philadelphus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphus
- Philadelphus is located in Robeson County
- Pates
(5 miles [8 km] to the west) - Pembroke
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Saddletree
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Prospect
(6 miles [9.7 km] to the west) - Red Springs
(7 miles [11.3 km] to the northwest)- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <3>
- Rennert
(7 miles [11.3 km] to the north) - Red Banks
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Red Banks
- Red Banks is located in Robeson County
- Barker Ten Mile
(8 miles [12.9 km] to the east)- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Rozier Siding ‑ Historic
(8 miles [12.9 km] to the east)- Note: The GPS coordinates that we are using for Rozier Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Shannon
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Shannon
- Shannon is located in Robeson County
- Elrod
(9 miles [14.5 km] to the southwest) - Lumberton
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Raynham
(10 miles [16.1 km] to the south) - Saint Pauls
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Population from the 2020 Census: 2,290 people
- Jump to TripAdvisor's Tourism page for Saint Pauls <3>
- Rex
(10 miles [16.1 km] to the northeast)- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- McDonald
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Population from the 2020 Census: 107 people
- Lumber Bridge
(12 miles [19.3 km] to the north)- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
- Maxton
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <3>
- Raemon
(14 miles [22.5 km] to the southwest) - Alfordsville
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Alfordsville
- Alfordsville is located in Robeson County
- Allenton
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Parkton
(14 miles [22.5 km] to the northeast)- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Dundarrach
(14 miles [22.5 km] to the north)- Note: The GPS coordinates that we are using for Dundarrach have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dundarrach
- Dundarrach is located in Hoke County
- Rowland
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <3>
- Fairmont
(15 miles [24.1 km] to the south)- Jump to our Gazetteer entry for Fairmont
- Fairmont is located in Robeson County
- Population from the 2020 Census: 2,580 people
- Jump to TripAdvisor's Tourism page for Fairmont <3>
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Oxendine Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.7185, Longitude: -79.1217 In this case, the coordinates for the Oxendine Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |