Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Oxendine Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Oxendine Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Oxendine Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Saddletree
(Less than 2 miles to the northwest)- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Barker Ten Mile
(2 miles [3.2 km] to the southeast)- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Rozier Siding ‑ Historic
(4 miles [6.4 km] to the northeast)- Note: The GPS coordinates that we are using for Rozier Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Lumberton
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Saint Pauls
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Population from the 2020 Census: 2,290 people
- Jump to TripAdvisor's Tourism page for Saint Pauls <3>
- Rennert
(8 miles [12.9 km] to the northwest) - Allenton
(9 miles [14.5 km] to the southeast)- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Philadelphus
(9 miles [14.5 km] to the northwest)- Note: The GPS coordinates that we are using for Philadelphus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphus
- Philadelphus is located in Robeson County
- Pembroke
(10 miles [16.1 km] to the west)- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Rex
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- Pates
(10 miles [16.1 km] to the west) - Shannon
(11 miles [17.7 km] to the northwest)- Jump to our Gazetteer entry for Shannon
- Shannon is located in Robeson County
- Red Springs
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <3>
- Prospect
(11 miles [17.7 km] to the west) - Red Banks
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Red Banks
- Red Banks is located in Robeson County
- Elrod
(13 miles [20.9 km] to the southwest) - Lumber Bridge
(13 miles [20.9 km] to the north)- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
- Raynham
(13 miles [20.9 km] to the southwest) - McDonald
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Population from the 2020 Census: 107 people
- Tar Heel
(13 miles [20.9 km] to the east)- Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <3>
- Parkton
(13 miles [20.9 km] to the north)- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Butters
(14 miles [22.5 km] to the southeast) - Fairmont
(15 miles [24.1 km] to the south)- Jump to our Gazetteer entry for Fairmont
- Fairmont is located in Robeson County
- Population from the 2020 Census: 2,580 people
- Jump to TripAdvisor's Tourism page for Fairmont <3>
- Proctorville
(15 miles [24.1 km] to the south)- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Population from the 2020 Census: 119 people
- Orrum
(16 miles [25.7 km] to the south)
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Oxendine Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.7046, Longitude: -79.0223 In this case, the coordinates for the Oxendine Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |