Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Miller Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Miller Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Miller Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Hamer
(5 miles [8 km] to the west)
- Fairmont
(7 miles [11.3 km] to the northeast)
- Rowland
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <2>
- Dillon
(8 miles [12.9 km] to the west)
- Lake View
(8 miles [12.9 km] to the southeast)
- Marietta
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Marietta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marietta
- Marietta is located in Robeson County
- Population from the 2020 Census: 168 people
- McDonald
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Population from the 2020 Census: 107 people
- Raynham
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Raynham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raynham
- Raynham is located in Robeson County
- Population from the 2020 Census: 68 people
- Oakland Crossroads
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Oakland Crossroads
- Oakland Crossroads is located in Dillon County (SC)
- Floydale
(10 miles [16.1 km] to the southwest)
- Barnesville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Barnesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnesville
- Barnesville is located in Robeson County
- Alfordsville
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Alfordsville
- Alfordsville is located in Robeson County
- Little Rock
(10 miles [16.1 km] to the west)
- Fork
(11 miles [17.7 km] to the south)
- Proctorville
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Population from the 2020 Census: 119 people
- Elrod
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Elrod have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elrod
- Elrod is located in Robeson County
- Orrum
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Orrum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orrum
- Orrum is located in Robeson County
- Population from the 2020 Census: 72 people
- Latta
(13 miles [20.9 km] to the southwest)
- Fair Bluff
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Fair Bluff have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fair Bluff
- Fair Bluff is located in Columbus County
- Population from the 2020 Census: 879 people
- Raemon
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Raemon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raemon
- Raemon is located in Robeson County
- Minturn
(14 miles [22.5 km] to the west)
- Nichols
(15 miles [24.1 km] to the south)
- Mullins
(16 miles [25.7 km] to the south)
- Boardman
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Boardman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boardman
- Boardman is located in Columbus County
- Population from the 2020 Census: 152 people
- Pembroke
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Pates
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Pates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pates
- Pates is located in Robeson County
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Miller Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.4477, Longitude: -79.2306 In this case, the coordinates for the Miller Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |