RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Mitchell County >> McKinney Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the McKinney Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McKinney Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the McKinney Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Spruce Pine
    (3 miles [4.8 km] to the west)
  • Grassy Creek
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Grassy Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grassy Creek
    • Grassy Creek is located in Mitchell County
  • Ashford
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for Ashford
    • Ashford is located in McDowell County
  • Linville Falls
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Linville Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Linville Falls
    • Linville Falls is located in Avery County
    • Jump to TripAdvisor's Tourism page for Linville Falls <2>
  • Stamey Town
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Stamey Town have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stamey Town
    • Stamey Town is located in Avery County
  • Penland
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Penland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penland
    • Penland is located in Mitchell County
    • Jump to TripAdvisor's Tourism page for Penland <2>
  • Little Switzerland
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Little Switzerland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Little Switzerland
    • Little Switzerland is located in McDowell County
    • Jump to TripAdvisor's Tourism page for Little Switzerland <2>
  • Jonas Ridge
    (7 miles [11.3 km] to the northeast)
  • Plumtree
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Plumtree have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plumtree
    • Plumtree is located in Avery County
    • Jump to TripAdvisor's Tourism page for Plumtree <2>
  • Crossnore
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Crossnore have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crossnore
    • Crossnore is located in Avery County
    • Population from the 2020 Census: 231 people
    • Jump to TripAdvisor's Tourism page for Crossnore <2>
  • Pineola
    (9 miles [14.5 km] to the northeast)
  • Mount Pleasant
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Mount Pleasant have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Pleasant
    • Mount Pleasant is located in Avery County
  • Linville
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Linville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Linville
    • Linville is located in Burke County
  • Chestnut Dale
    (10 miles [16.1 km] to the north)
    • Jump to our Gazetteer entry for Chestnut Dale
    • Chestnut Dale is located in Avery County
  • Newdale
    (10 miles [16.1 km] to the west)
    • Jump to our Gazetteer entry for Newdale
    • Newdale is located in Yancey County
  • Montezuma
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Montezuma have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Montezuma
    • Montezuma is located in Avery County
  • Bakersville
    (11 miles [17.7 km] to the northwest)
  • Double Island
    (11 miles [17.7 km] to the west)
    • Jump to our Gazetteer entry for Double Island
    • Double Island is located in Yancey County
  • Micaville
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Micaville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Micaville
    • Micaville is located in Yancey County
    • Jump to TripAdvisor's Tourism page for Micaville <2>
  • Celo
    (12 miles [19.3 km] to the west)
    • Jump to our Gazetteer entry for Celo
    • Celo is located in Yancey County
  • Linville
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Linville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Linville
    • Linville is located in Avery County
    • Jump to TripAdvisor's Tourism page for Linville <2>
  • Newland
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Newland have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newland
    • Newland is located in Avery County
    • Population from the 2020 Census: 694 people
    • Jump to TripAdvisor's Tourism page for Newland <2>
  • Vale
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Vale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vale
    • Vale is located in Avery County
  • Minneapolis
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Minneapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minneapolis
    • Minneapolis is located in Avery County
  • Hamrick
    (13 miles [20.9 km] to the southwest)
    • Jump to our Gazetteer entry for Hamrick
    • Hamrick is located in Yancey County

The official website for Mitchell County: www.mitchellcounty.org/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McKinney Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.9196, Longitude: -81.9993       In this case, the coordinates for the McKinney Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 06 Apr 2024