Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Lewis Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Lewis Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Lewis Cemetery. We've listed the following communities based on their distance, with the closest first.
- Lumberton
(Less than 2 miles to the southwest)- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Barker Ten Mile
(2 miles [3.2 km] to the north)- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Allenton
(4 miles [6.4 km] to the southeast)- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- Saddletree
(6 miles [9.7 km] to the northwest)- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Lowe
(6 miles [9.7 km] to the west) - Rozier Siding ‑ Historic
(7 miles [11.3 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Rozier Siding. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Butters
(9 miles [14.5 km] to the southeast) - Proctorville
(11 miles [17.7 km] to the south)- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Population from the 2020 Census: 119 people
- Saint Pauls
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Population from the 2020 Census: 2,290 people
- Jump to TripAdvisor's Tourism page for Saint Pauls <3>
- Raynham
(12 miles [19.3 km] to the west) - McDonald
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Population from the 2020 Census: 107 people
- Fairmont
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Fairmont
- Fairmont is located in Robeson County
- Population from the 2020 Census: 2,580 people
- Jump to TripAdvisor's Tourism page for Fairmont <3>
- Orrum
(12 miles [19.3 km] to the south) - Bladenboro
(12 miles [19.3 km] to the southeast)- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <3>
- Tar Heel
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <3>
- Pembroke
(12 miles [19.3 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Pembroke. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <3>
- Rennert
(13 miles [20.9 km] to the northwest) - Philadelphus
(13 miles [20.9 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Philadelphus. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Philadelphus
- Philadelphus is located in Robeson County
- Pates
(13 miles [20.9 km] to the west) - Boardman
(14 miles [22.5 km] to the south) - Dublin
(14 miles [22.5 km] to the east) - Elrod
(14 miles [22.5 km] to the west) - Rex
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- Prospect
(15 miles [24.1 km] to the northwest) - Red Banks
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Red Banks
- Red Banks is located in Robeson County
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Lewis Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.6404, Longitude: -78.9828 In this case, the coordinates for the Lewis Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |