Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Graham / Lowery Family Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Graham / Lowery Family Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Graham / Lowery Family Cemetery (FG ID #2419577). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Graham / Lowery Family Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Pates
(Less than 2 miles to the west)
- Note: The GPS coordinates that we are using for Pates have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pates
- Pates is located in Robeson County
- Pembroke
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Population from the 2020 Census: 2,942 people
- Jump to TripAdvisor's Tourism page for Pembroke <4>
- Prospect
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Prospect have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prospect
- Prospect is located in Robeson County
- Red Banks
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for Red Banks
- Red Banks is located in Robeson County
- Philadelphus
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Philadelphus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphus
- Philadelphus is located in Robeson County
- Elrod
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Elrod have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elrod
- Elrod is located in Robeson County
- Raynham
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Raynham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raynham
- Raynham is located in Robeson County
- Population from the 2020 Census: 68 people
- Saddletree
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Red Springs
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <4>
- McDonald
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Population from the 2020 Census: 107 people
- Maxton
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxton
- Maxton is located in Robeson County
- Population from the 2020 Census: 2,332 people
- Jump to TripAdvisor's Tourism page for Maxton <4>
- Raemon
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Raemon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raemon
- Raemon is located in Robeson County
- Rennert
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rennert
- Rennert is located in Robeson County
- Population from the 2020 Census: 373 people
- Shannon
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Shannon
- Shannon is located in Robeson County
- Alfordsville
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Alfordsville
- Alfordsville is located in Robeson County
- Lumberton
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <4>
- Barker Ten Mile
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Rowland
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowland
- Rowland is located in Robeson County
- Population from the 2020 Census: 985 people
- Jump to TripAdvisor's Tourism page for Rowland <4>
- Rozier Siding ‑ Historic
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Rozier Siding have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Rex
(13 miles [20.9 km] to the northeast)
- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- Oakland Crossroads
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Oakland Crossroads
- Oakland Crossroads is located in Dillon County (SC)
- Fairmont
(14 miles [22.5 km] to the south)
- Saint Pauls
(14 miles [22.5 km] to the northeast)
- Lumber Bridge
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
- East Laurinburg
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for East Laurinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Laurinburg
- East Laurinburg is located in Scotland County
- Population from the 2020 Census: 277 people
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Graham / Lowery Family Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.6980, Longitude: -79.1874 |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |