Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Edwards Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Edwards Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Edwards Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

Stecoah
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Stecoah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stecoah
- Stecoah is located in Graham County
Cheoah
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Cheoah
- Cheoah is located in Graham County
Wesser
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for Wesser
- Wesser is located in Swain County
Nantahala
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Nantahala
- Nantahala is located in Swain County
Almond
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Almond have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Almond
- Almond is located in Swain County
- Jump to TripAdvisor's Tourism page for Almond <3>
Judson ‑ Historic
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Judson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Judson
- Judson is located in Swain County
Bushnell ‑ Historic
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Bushnell. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bushnell
- Bushnell is located in Swain County
Robbinsville
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Robbinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robbinsville
- Robbinsville is located in Graham County
- Population from the 2020 Census: 716 people
- Jump to TripAdvisor's Tourism page for Robbinsville <3>
Bear Creek
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Bear Creek
- Bear Creek is located in Graham County
Fairview
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Fairview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Macon County
Forney ‑ Historic
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Forney. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Forney
- Forney is located in Swain County
Yellow Creek
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Yellow Creek
- Yellow Creek is located in Graham County
Topton
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Topton
- Topton is located in Cherokee County
- Jump to TripAdvisor's Tourism page for Topton <3>
Fontana Dam
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Fontana Dam
- Fontana Dam is located in Graham County
- Population from the 2020 Census: 6 people
- Fontana Dam has also been known as:
- Fontana Village
- Jump to TripAdvisor's Tourism page for Fontana Dam <3>
Lake Santeetlah
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Lake Santeetlah
- Lake Santeetlah is located in Graham County
- Population from the 2020 Census: 43 people
- Lake Santeetlah has also been known as:
- Santeetla
- Santeetlah
- Santultah
- Thunderbird Mountain
- Thunderbird
Rhodo
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Rhodo
- Rhodo is located in Cherokee County
Buffalo
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Cherokee County
Bryson City
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Bryson City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryson City
- Bryson City is located in Swain County
- Population from the 2020 Census: 1,443 people
- Jump to TripAdvisor's Tourism page for Bryson City <3>
Andrews
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Andrews have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Andrews
- Andrews is located in Cherokee County
- Population from the 2020 Census: 1,855 people
- Jump to TripAdvisor's Tourism page for Andrews <3>
Unahala
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Unahala
- Unahala is located in Swain County
Leatherman
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Leatherman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leatherman
- Leatherman is located in Macon County
Whittier
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Whittier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whittier
- Whittier is located in Jackson County
- Jump to TripAdvisor's Tourism page for Whittier <3>
Marble
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Marble have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble
- Marble is located in Cherokee County
- Jump to TripAdvisor's Tourism page for Marble <3>
Red Bank
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Red Bank have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Bank
- Red Bank is located in Blount County (TN)
Elkmont ‑ Historic
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Elkmont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elkmont
- Elkmont is located in Sevier County (TN)

Off-the-Road Links ...

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Edwards Cemetery. The point we use is located at these GPS coordinates - Latitude: 35.3756, Longitude: -83.6813 In this case, the coordinates for the Edwards Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.