Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Davis Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Davis Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Davis Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Tar Heel
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <3>
- Dublin
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dublin
- Dublin is located in Bladen County
- Population from the 2020 Census: 328 people
- Barker Ten Mile
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Allenton
(8 miles [12.9 km] to the southwest)
- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
- White Oak
(8 miles [12.9 km] to the east)
- Rozier Siding ‑ Historic
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Rozier Siding have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
- Butters
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Butters have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butters
- Butters is located in Bladen County
- Ruskin
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Ruskin
- Ruskin is located in Bladen County
- Lumberton
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <3>
- Saint Pauls
(10 miles [16.1 km] to the northwest)
- Saddletree
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
- Bladenboro
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Population from the 2020 Census: 1,697 people
- Jump to TripAdvisor's Tourism page for Bladenboro <3>
- Yorick
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Yorick
- Yorick is located in Bladen County
- Jerome
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Jerome have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jerome
- Jerome is located in Bladen County
- Abbottsburg
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Abbottsburg
- Abbottsburg is located in Bladen County
- Elizabethtown
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Bladen County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elizabethtown <3>
- Rex
(15 miles [24.1 km] to the northwest)
- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
- Rennert
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rennert
- Rennert is located in Robeson County
- Population from the 2020 Census: 373 people
- Mount Olive
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Mount Olive have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Olive
- Mount Olive is located in Bladen County
- Parkton
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Ardulusa
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Ardulusa
- Ardulusa is located in Cumberland County
- Orrum
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Orrum have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orrum
- Orrum is located in Robeson County
- Population from the 2020 Census: 72 people
- Clarkton
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Population from the 2020 Census: 741 people
- Jump to TripAdvisor's Tourism page for Clarkton <3>
- Lumber Bridge
(18 miles [29 km] to the northwest)
- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
- Philadelphus
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Philadelphus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Philadelphus
- Philadelphus is located in Robeson County
Off-the-Road Links ...
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Davis Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.7041, Longitude: -78.8464 In this case, the coordinates for the Davis Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |