Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Boone Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Boone Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Boone Cemetery. We've listed the following communities based on their distance, with the closest first.

Saint Pauls
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Population from the 2020 Census: 2,290 people
- Jump to TripAdvisor's Tourism page for Saint Pauls <2>
Rozier Siding ‑ Historic
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rozier Siding. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Rozier Siding
- Rozier Siding is located in Robeson County
Tar Heel
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Population from the 2020 Census: 115 people
- Jump to TripAdvisor's Tourism page for Tar Heel <2>
Jerome
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Jerome. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jerome
- Jerome is located in Bladen County
White Oak
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for White Oak
- White Oak is located in Bladen County
- Jump to TripAdvisor's Tourism page for White Oak <2>
Saddletree
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Saddletree
- Saddletree is located in Robeson County
Barker Ten Mile
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
Parkton
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <2>
Rex
(10 miles [16.1 km] to the northwest)
- Jump to our Gazetteer entry for Rex
- Rex is located in Robeson County
Ardulusa
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Ardulusa
- Ardulusa is located in Cumberland County
Rennert
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rennert
- Rennert is located in Robeson County
- Population from the 2020 Census: 373 people
Hope Mills
(12 miles [19.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hope Mills. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hope Mills
- Hope Mills is located in Cumberland County
- Population from the 2020 Census: 15,848 people
- Jump to TripAdvisor's Tourism page for Hope Mills <2>
Dublin
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Dublin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dublin
- Dublin is located in Bladen County
- Population from the 2020 Census: 328 people
Ruskin
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Ruskin
- Ruskin is located in Bladen County
Lumberton
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Population from the 2020 Census: 20,239 people
- Jump to TripAdvisor's Tourism page for Lumberton <2>
Timberlake
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Timberlake have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timberlake
- Timberlake is located in Cumberland County
Lumber Bridge
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
Allenton
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Allenton
- Allenton is located in Robeson County
Judson
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Judson
- Judson is located in Cumberland County
Cumberland
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Cumberland
- Cumberland is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Cumberland <2>
Yorick
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Yorick
- Yorick is located in Bladen County
Shannon
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Shannon
- Shannon is located in Robeson County
Lowe
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Lowe have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowe
- Lowe is located in Robeson County
Butters
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Butters have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Butters
- Butters is located in Bladen County
Williams Village
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Williams Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williams Village
- Williams Village is located in Cumberland County

Off-the-Road Links ...

The official website for Bladen County: www.bladeninfo.net/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>	Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Boone Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.7943, Longitude: -78.8734 In this case, the coordinates for the Boone Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.