Census Data for Barker Ten Mile
As far as we can tell, Barker Ten Mile has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Barker Ten Mile, you might be interested in some nearby communities where we do:
- Lumberton
(3 miles [4.8 km] to the south)- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Jump to TripAdvisor's Tourism page for Lumberton <2>
- Saint Pauls
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Jump to TripAdvisor's Tourism page for Saint Pauls <2>
- Rennert
(10 miles [16.1 km] to the northwest) - Pembroke
(11 miles [17.7 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Pembroke. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Tar Heel
(11 miles [17.7 km] to the east)- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Jump to TripAdvisor's Tourism page for Tar Heel <2>
- McDonald
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Raynham
(13 miles [20.9 km] to the southwest) - Bladenboro
(14 miles [22.5 km] to the southeast)- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Jump to TripAdvisor's Tourism page for Bladenboro <2>
- Fairmont
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Fairmont
- Fairmont is located in Robeson County
- Jump to TripAdvisor's Tourism page for Fairmont <2>
- Orrum
(14 miles [22.5 km] to the south) - Proctorville
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Red Springs
(14 miles [22.5 km] to the northwest)- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Jump to TripAdvisor's Tourism page for Red Springs <2>
- Continue List (374 more) ...
- Dublin
(15 miles [24.1 km] to the east) - Lumber Bridge
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Parkton
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Jump to TripAdvisor's Tourism page for Parkton <2>
- Dublin
Robeson County ...
Barker Ten Mile is located in Robeson County<4>.
For more information, please visit our Census Page for Robeson County.
Miscellaneous Information for Barker Ten Mile ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Robeson County or the community of Barker Ten Mile:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 37 (North Carolina)
- County Code: 155 (Robeson County)
- Place Code: 03665 (Barker Ten Mile)
- State & County Code: 37/155 (North Carolina / Robeson County)
- State & Place Code: 37/03665 (North Carolina / Barker Ten Mile)
- Misc. Census Codes ...
- Barker Ten Mile is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).
For more information about the various Federal identification codes, please visit our Misc Page for Barker Ten Mile.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Barker Ten Mile. If you can help, please contact us through our Feedback Page.
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | If you're interested in how the shape of North Carolina's counties, including Robeson, have changed over time, we recommend the Atlas of Historical County Boundaries. |