|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Angelview in the Atlas, the following communities of the 1890's would have been found near the current location of Angelview. The following communities are listed based on their distance, with the one closest to Angelview listed first.
- Wendell
(Less than 2 miles to the north)
- Eagle Rock
(3 miles [4.8 km] to the northwest)
- Eagle Rock is located in Wake County
- Jump to our Gazetteer entry for Eagle Rock
- Shotwell
(4 miles [6.4 km] to the southwest)
- Shotwell is located in Wake County
- Jump to our Gazetteer entry for Shotwell
- Archer Lodge
(4 miles [6.4 km] to the south)
- Archer Lodge is located in Johnston County
- Jump to our Gazetteer entry for Archer Lodge
- Population from the 2020 Census: 5,322 people
- Archer Lodge has also been known as:
- Archer
- Earpsboro
(4 miles [6.4 km] to the east)
- Earpsboro is located in Johnston County
- Jump to our Gazetteer entry for Earpsboro
- Clayton
(9 miles [14.5 km] to the southwest)
- Union Hope
(9 miles [14.5 km] to the northeast)
- Union Hope is located in Nash County
- Jump to our Gazetteer entry for Union Hope
- Milburnie
(9 miles [14.5 km] to the west)
- Milburnie is located in Wake County
- Jump to our Gazetteer entry for Milburnie
- Auburn
(11 miles [17.7 km] to the southwest)
- Auburn is located in Wake County
- Jump to our Gazetteer entry for Auburn
- Wilson's Mills
(12 miles [19.3 km] to the south)
- Wilson's Mills is located in Johnston County
- Jump to our Gazetteer entry for Wilson's Mills
- Population from the 2020 Census: 2,847 people
- Connor
(12 miles [19.3 km] to the east)
- Connor is located in Wilson County
- Jump to our Gazetteer entry for Connor
- Rolesville
(12 miles [19.3 km] to the northwest)
- Sutton
(12 miles [19.3 km] to the northeast)
- Sutton is located in Franklin County
- Jump to our Gazetteer entry for Sutton
- Garner
(14 miles [22.5 km] to the west)
- Neuse
(14 miles [22.5 km] to the northwest)
- Millbrook
(14 miles [22.5 km] to the northwest)
- Millbrook is located in Wake County
- Jump to our Gazetteer entry for Millbrook
- Wyatt
(15 miles [24.1 km] to the northwest)
- Wyatt is located in Wake County
- Jump to our Gazetteer entry for Wyatt
- Raleigh
(15 miles [24.1 km] to the west)
- Selma
(16 miles [25.7 km] to the south)
- Micro
(16 miles [25.7 km] to the southeast)
- Micro is located in Johnston County
- Jump to our Gazetteer entry for Micro
- Population from the 2020 Census: 553 people
- Bagley
(16 miles [25.7 km] to the southeast)
- Bagley is located in Johnston County
- Jump to our Gazetteer entry for Bagley
- Forestville
(16 miles [25.7 km] to the northwest)
- Forestville is located in Wake County
- Jump to our Gazetteer entry for Forestville
- Smithfield
(17 miles [27.4 km] to the south)
- Kenly
(17 miles [27.4 km] to the southeast)
- Stanhope
(17 miles [27.4 km] to the northeast)
- Stanhope is located in Nash County
- Jump to our Gazetteer entry for Stanhope
- Royal
(17 miles [27.4 km] to the north)
- Royal is located in Franklin County
- Jump to our Gazetteer entry for Royal
- Falls
(17 miles [27.4 km] to the northwest)
- Falls is located in Wake County
- Jump to our Gazetteer entry for Falls
- Six Forks
(17 miles [27.4 km] to the northwest)
- Six Forks is located in Wake County
- Jump to our Gazetteer entry for Six Forks
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Angelview, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|