Census Data for Allenton
As far as we can tell, Allenton has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Allenton, you might be interested in some nearby communities where we do:
- Lumberton
(4 miles [6.4 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Lumberton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Lumberton
- Lumberton is located in Robeson County
- Jump to TripAdvisor's Tourism page for Lumberton <2>
- Bladenboro
(8 miles [12.9 km] to the southeast)- Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bladenboro
- Bladenboro is located in Bladen County
- Jump to TripAdvisor's Tourism page for Bladenboro <2>
- Orrum
(9 miles [14.5 km] to the southwest) - Boardman
(10 miles [16.1 km] to the south) - Proctorville
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Proctorville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Proctorville
- Proctorville is located in Robeson County
- Dublin
(12 miles [19.3 km] to the east) - Fairmont
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Fairmont
- Fairmont is located in Robeson County
- Jump to TripAdvisor's Tourism page for Fairmont <2>
- Tar Heel
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Tar Heel
- Tar Heel is located in Bladen County
- Jump to TripAdvisor's Tourism page for Tar Heel <2>
- McDonald
(14 miles [22.5 km] to the west)- Jump to our Gazetteer entry for McDonald
- McDonald is located in Robeson County
- Raynham
(15 miles [24.1 km] to the west) - Saint Pauls
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Saint Pauls
- Saint Pauls is located in Robeson County
- Jump to TripAdvisor's Tourism page for Saint Pauls <2>
- Pembroke
(16 miles [25.7 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Pembroke. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Robeson County
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Continue List (266 more) ...
- Clarkton
(17 miles [27.4 km] to the southeast)- Note: The GPS coordinates that we are using for Clarkton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkton
- Clarkton is located in Bladen County
- Jump to TripAdvisor's Tourism page for Clarkton <2>
- Rennert
(17 miles [27.4 km] to the northwest) - Cerro Gordo
(18 miles [29 km] to the south)- Note: The GPS coordinates that we are using for Cerro Gordo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cerro Gordo
- Cerro Gordo is located in Columbus County
- Clarkton
Robeson County ...
Allenton is located in Robeson County<4>.
For more information, please visit our Census Page for Robeson County.
Miscellaneous Information for Allenton ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Robeson County or the community of Allenton:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 37 (North Carolina)
- County Code: 155 (Robeson County)
- Place Code: 00970 (Allenton)
- State & County Code: 37/155 (North Carolina / Robeson County)
- State & Place Code: 37/00970 (North Carolina / Allenton)
- Misc. Census Codes ...
- Allenton is located in Census Region #3 (the South Region) and Division #5 (the South Atlantic Division).
For more information about the various Federal identification codes, please visit our Misc Page for Allenton.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Allenton. If you can help, please contact us through our Feedback Page.
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | If you're interested in how the shape of North Carolina's counties, including Robeson, have changed over time, we recommend the Atlas of Historical County Boundaries. |