Miscellaneous Information
Various Identification Codes ...
GNIS Codes ...
The U.S. Board on Geographic Names (BGN) was created to address the problems caused by spelling and naming variations. The BGN will usually recognize an existing name or, when necessary, establish a name for a geographic feature (such as a mountain, lake, river, stream, city, town, village, dam, bridge, etc).
The BGN names are kept in a database called the Geographic Names Information System (GNIS) and it is the official Federal repository. The GNIS is operated and maintained by the U.S. Geological Survey (USGS).
A unique and permanent identifier has been assigned for each name in the GNIS database. These names and identifiers are definitive and it is intended that they are to be used by all departments of the Federal Government:
GNIS ID for Thompson Falls: 2412062
GNIS ID for Sanders County: 1719578
GNIS ID for Montana: 767982
FIPS Codes ...
In a past effort, various federal agencies created a set of codes with a purpose similar to the GNIS codes. These codes are called the Federal Information Processing Standard (or the FIPS 55 codes). Although they are still used by some organizations, the FIPS codes are obsolete and will ultimately be replaced by the GNIS codes.
The following FIPS codes apply to Thompson Falls:
| Place (Community) Code: | 73825 |
| State Code: | 30 (Montana) |
| County Code: | 089 (Sanders County) |
Since the Place and County FIPS codes are not unique and can be repeated in other States, it's necessary to combine the State code with the Place and County FIPS codes to uniquely identify them - for example:
| State/Place Code: | 30/73825 |
| State/County Code: | 30/089 |
As already mentioned, the FIPS codes are to be replaced by the GNIS codes. The following reflect those changes:
| FIPS Code | translates to | GNIS Code | |
| State of Montana: | 30 | 767982 | |
| Sanders County: | 30/089 | 1719578 | |
| Thompson Falls: | 30/73825 | 2412062 |
GPS Location - GNIS vs Census ...
An important aspect of the GNIS code is that it assigns a GPS location (the latitude/longitude) to the geographic feature. This location is simply a point on the map and does not represent the size or shape of the feature. In the case of Thompson Falls, it is a point within Thompson Falls that might be a post office, the city hall or simply an intersection - the point should really be considered arbitrary and only indicating a general location.
For Thompson Falls, the GNIS GPS location is given as:
Lat: 47° 36' 1" (or 47.6°)
Lon: -115° 20' 17" (or -115.34°)
Determined by its statistical needs, the Census Bureau has defined a sampling area for Thompson Falls - this area also contains a map point. As with the GNIS code, the location of the Census point should be considered as being arbitrary within the sampling area.
For Thompson Falls, the Census 2010 GPS location is given as:
Lat: 47° 35' 57" (or 47.6°)
Lon: -115° 20' 24" (or -115.34°)
The map point defined by the Census Bureau lies 631 feet to the southwest<1> of the point given by the GNIS (see above).
You might note that the GPS location given for the 2010 Census is different than the location that was specified by the 2000 Census:
Lat: 47° 35' 47" (or 47.6°)
Lon: -115° 20' 37" (or -115.34°)
The GPS location given for the 2000 Census lies 1,323 feet to the southwest<2> of the point given by the 2010 Census.
Regional Codes ...
For statistical purposes, the US Census Bureau has divided the country into four Regions. Thompson Falls is located in Region #4 (the West Region).
In turn, the US Census Bureau has further divided each Region into Divisions. Thompson Falls is located in Division #8 (the Mountain Division).
The Office of Management and Budget (OMB) has created ten Federal Regions. Thompson Falls is located in Region VIII (Region 8).
The Federal Emergency Management Agency (FEMA) has created ten Management Regions. Thompson Falls is located in Region VIII (Region 8).
Referenced GNIS Records ...
GNIS ID #792090 (Name of Record: Thompson Falls)
Class: populated place
A place or area having clustered or scattered buildings and a permanent population (such as a city, settlement, town or village). The boundaries may or may not coincide with the perceived population.
A 'populated place' record may have a corresponding 'census' or 'civil' record. The information contained in the 'populated place' record applies only to the class and should not be confused with either the 'census' and 'civil' classes.
County: Sanders
Map Name: Thompson Falls
Lat: 47.5971572 Lon: -115.3443198
Elev: 779 ft.
GNIS ID #2412062 (Name of Record: City of Thompson Falls)
Class: civil
A political division formed for administrative purposes (such as a borough, county, incorporated place, parish, town or township).
A 'civil' record may have a corresponding 'census' or 'populated place' record. The information contained in the 'civil' record applies only to the class and should not be confused with either the 'census' and 'populated place' classes.
County: Sanders
Map Name: Thompson Falls
Lat: 47.6004581 Lon: -115.33823
Elev: 805 ft.
Referenced FIPS Records ...
FIPS Code: 30/73825 (Place Name: Thompson Falls)
County: Sanders (FIPS State/County: 30/089)
Class: C1
Identifies an incorporated place (ie- Thompson Falls) that does not serve as a primary county division - or in other words, it is included in and is part of a primary county division (ie- Sanders County).
GSA Code: 1140
MRF Code: 625
Off-the-Road Links ...
Unfortunately, we don't know of a website for Thompson Falls. If you can help, please contact us through our Feedback Page.
The official website for Sanders County: www.co.sanders.mt.us/
The official website for State of Montana: https://mt.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
The official website of the U.S. Census Bureau
The official website of the U.S. Office of Management and Budget (OMB)
The official website of the U.S. Federal Emergency Management Agency (FEMA)