Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Vinton had a population of 12 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Vinton, with the one closest to Vinton listed first.
- Whites
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Whites have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whites
- Whites is located in Clay County
- Waverly
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Waverly. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Waverly
- Waverly is located in Clay County
- Google driving directions:
- From your current location to Waverly
- From Vinton to Waverly
- Binford
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Binford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Binford
- Binford is located in Monroe County
- West Point
(8 miles [12.9 km] to the southwest)
- Hamilton
(8 miles [12.9 km] to the northeast)
- Sykes ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Sykes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sykes
- Sykes is located in Monroe County
- Muldon
(9 miles [14.5 km] to the northwest)
- Tibbee
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Tibbee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tibbee
- Tibbee is located in Clay County
- Caledonia
(11 miles [17.7 km] to the east)
- Aberdeen
(11 miles [17.7 km] to the north)
- Columbus
(12 miles [19.3 km] to the southeast)
- McIntyre ‑ Historic
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for McIntyre have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McIntyre
- McIntyre is located in Lowndes County
- Steens
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Steens have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Steens
- Steens is located in Lowndes County
- Grubb Springs ‑ Historic
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Grubb Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grubb Springs
- Grubb Springs is located in Monroe County
- Siloam
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Siloam. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Siloam
- Siloam is located in Clay County
- Google driving directions:
- From your current location to Siloam
- From Vinton to Siloam
- Mhoons Valley
(14 miles [22.5 km] to the west)
- Osborn
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Osborn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osborn
- Osborn is located in Oktibbeha County
- Abbott
(14 miles [22.5 km] to the west)
- Gibson
(15 miles [24.1 km] to the northwest)
- Palo Alto
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Palo Alto have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palo Alto
- Palo Alto is located in Clay County
- Beeks ‑ Historic
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Beeks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beeks
- Beeks is located in Monroe County
- New Hope
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Lowndes County
- Greenbrier ‑ Historic
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Monroe County
- Acker ‑ Historic
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Acker have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Acker
- Acker is located in Monroe County
- Griffith
(17 miles [27.4 km] to the west)
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Vinton, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |