|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Tangipahoa in the Atlas, the following communities of the 1890's would have been found near the current location of Tangipahoa. The following communities are listed based on their distance, with the one closest to Tangipahoa listed first.
- Thompson
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Thompson. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Thompson
- Thompson is located in Amite County
- McComb
(6 miles [9.7 km] to the east)
- Summit
(6 miles [9.7 km] to the east)
- East Fork
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for East Fork have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Fork
- East Fork is located in Amite County
- Auburn
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Auburn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Auburn
- Auburn is located in Lincoln County
- Fernwood
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Fernwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fernwood
- Fernwood is located in Pike County
- Smithdale
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Smithdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithdale
- Smithdale is located in Amite County
- Johnstons Station
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Johnstons Station have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Johnstons Station
- Johnstons Station is located in Lincoln County
- Magnolia
(10 miles [16.1 km] to the southeast)
- Huron
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Huron. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Huron
- Huron is located in Amite County
- Norfield
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Norfield. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Norfield
- Norfield is located in Lincoln County
- Little Springs
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Little Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Springs
- Little Springs is located in Franklin County
- Chatawa
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Chatawa. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Chatawa
- Chatawa is located in Pike County
- Bogue Chitto
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Bogue Chitto have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bogue Chitto
- Bogue Chitto is located in Lincoln County
- Liberty
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Liberty have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liberty
- Liberty is located in Amite County
- Population from the 2020 Census: 634 people
- Holmesville
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Holmesville
- Holmesville is located in Pike County
- Zion Hill
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Zion Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion Hill
- Zion Hill is located in Amite County
- Gillsburg
(16 miles [25.7 km] to the south)
- Jump to our Gazetteer entry for Gillsburg
- Gillsburg is located in Amite County
- Topisaw
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Topisaw
- Topisaw is located in Pike County
- Ruth
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Ruth have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ruth
- Ruth is located in Lincoln County
- Osyka
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Osyka have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osyka
- Osyka is located in Pike County
- Population from the 2020 Census: 407 people
- Jump to TripAdvisor's Tourism page for Osyka <3>
- Wellman
(18 miles [29 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Wellman. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Wellman
- Wellman is located in Lincoln County
- O'Neil
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for O'Neil have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for O'Neil
- O'Neil is located in Amite County
- Bewelcome
(21 miles [33.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Bewelcome. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Bewelcome
- Bewelcome is located in Amite County
- Kentwood
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Kentwood have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kentwood
- Kentwood is located in Tangipahoa Parish (LA)
- Population from the 2020 Census: 2,452 people
- Jump to TripAdvisor's Tourism page for Kentwood <3>
- Smithburg
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Smithburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Smithburg
- Smithburg is located in Pike County
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Tangipahoa, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|