|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Myles had a post office and railroad service.
The following communities are listed based on their distance from Myles, with the one closest to Myles listed first.
- Carpenter
(Less than 2 miles to the northeast)
- Carlisle
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Carlisle. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Carlisle
- Carlisle is located in Claiborne County
- Google driving directions:
- From your current location to Carlisle
- From Myles to Carlisle
- Saint Elmo
(6 miles [9.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Saint Elmo. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Saint Elmo
- Saint Elmo is located in Claiborne County
- Google driving directions:
- From your current location to Saint Elmo
- From Myles to Saint Elmo
- Utica
(7 miles [11.3 km] to the northeast)
- Rocky Springs
(7 miles [11.3 km] to the northwest)
- Hermanville
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Hermanville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hermanville
- Hermanville is located in Claiborne County
- Reganton
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Reganton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reganton
- Reganton is located in Claiborne County
- Humphreys
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Humphreys have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Humphreys
- Humphreys is located in Claiborne County
- Cayuga
(9 miles [14.5 km] to the north)
- Bear Creek
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Bear Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Bear Creek
- Bear Creek is located in Hinds County
- Google driving directions:
- From your current location to Bear Creek
- From Myles to Bear Creek
- Adams
(12 miles [19.3 km] to the northeast)
- Chapel Hill
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Chapel Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Hinds County
- Barlow
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Barlow have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barlow
- Barlow is located in Copiah County
- Thompsonville
(14 miles [22.5 km] to the east)
- Newman
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Newman. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Newman
- Newman is located in Hinds County
- Google driving directions:
- From your current location to Newman
- From Myles to Newman
- Learned
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Learned have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Learned
- Learned is located in Hinds County
- Population from the 2020 Census: 82 people
- Jump to TripAdvisor's Tourism page for Learned <3>
- Port Gibson
(16 miles [25.7 km] to the west)
- Ingleside
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Ingleside have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ingleside
- Ingleside is located in Claiborne County
- Gordon
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Gordon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gordon
- Gordon is located in Claiborne County
- Dry Grove
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Dry Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dry Grove
- Dry Grove is located in Hinds County
- Yokena
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Yokena have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yokena
- Yokena is located in Warren County
- Oaklawn
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Oaklawn have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oaklawn
- Oaklawn is located in Claiborne County
- McBride
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for McBride have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McBride
- McBride is located in Jefferson County
- Allen
(18 miles [29 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Allen. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Allen
- Allen is located in Copiah County
- Google driving directions:
- From your current location to Allen
- From Myles to Allen
- Gallatin
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Gallatin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gallatin
- Gallatin is located in Copiah County
- Oakley
(18 miles [29 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Oakley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Oakley
- Oakley is located in Hinds County
- Google driving directions:
- From your current location to Oakley
- From Myles to Oakley
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Myles, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|