RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Mississippi >> Hancock County >> Kiln >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Mississippi


The Commemorative Quarter for Mississippi







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Kiln, we use the following websites to find information relevant to Kiln and the surrounding area.

  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Kiln:
    • 30.409148, -89.435320
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Kiln
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Kiln ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Diamondhead
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Diamondhead have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Diamondhead
    • Diamondhead is located in Hancock County
    • Jump to TripAdvisor's Tourism page for Diamondhead <2>
  • Flat Top
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Flat Top have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Flat Top
    • Flat Top is located in Hancock County
  • Gulfside
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Gulfside have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gulfside
    • Gulfside is located in Hancock County
  • Lakeshore
    (11 miles [17.7 km] to the south)
    • Jump to our Gazetteer entry for Lakeshore
    • Lakeshore is located in Hancock County
  • Leetown
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Leetown have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leetown
    • Leetown is located in Hancock County
  • Napoleon
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Napoleon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Napoleon
    • Napoleon is located in Hancock County
  • Pass Christian
    (12 miles [19.3 km] to the southeast)
  • Shoreline Park
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Shoreline Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shoreline Park
    • Shoreline Park is located in Hancock County
  • Standard
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Standard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Standard
    • Standard is located in Hancock County
  • Timber Ridge
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Timber Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Timber Ridge
    • Timber Ridge is located in Harrison County
  • Waveland
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Waveland have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Waveland
    • Waveland is located in Hancock County
    • Population from the 2020 Census: 6,315 people
    • Jump to TripAdvisor's Tourism page for Waveland <2>

How Far From Kiln to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Kiln to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<3> beginning in Kiln and extending to:

  • Bay Saint Louis, which is the Seat of Hancock County, lies 9 miles [14.5 km]<3> to the southeast. If you could walk a straight line from Kiln to Bay Saint Louis, with an average speed<4> of 2.2 miles [3.5 km] per hour, it would take four to five hours to make the trip. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take a little over three hours.
  • Jackson, which is the State Capital of Mississippi, lies 137 miles [220.5 km] to the north northwest (NNW). Driving, with an average speed of 63 miles [101.4 km] per hour, would take less than three hours, a buggy would take 6 days and walking would take 8 days.
  • The White House (Washington, DC) is 914 miles [1,470.9 km] to the northeast (NE). Driving would take most of two days, a buggy would take 36 days and walking would take 52 days.
  • The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,812 miles [10,962.9 km] and it lies to the northeast (NE).<6>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,516 miles [12,095.8 km] and it lies to the northeast (NE).<7>
  • The distance to Saint Peter's Basilica (The Vatican) is 5,394 miles [8,680.8 km] and it lies to the northeast (NE).<8>

Unfortunately, we don't know of a website for Kiln. If you can help, please contact us through our Feedback Page.

The official website for State of Mississippi: https://www.ms.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Kiln) to Point B.Our distance measurements begin at a specific point in Kiln. The point we use is located at these GPS coordinates - Latitude: 30.4091, Longitude: -89.4353    
<4>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<5>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Kiln to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<6>The calculated bearing (or angle) to Jerusalem is 314.992 degrees.
<7>The calculated bearing (or angle) to Mecca is 310.39 degrees.
<8>The calculated bearing (or angle) to the Vatican is 311.905 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024