Welcome to Gerlach Mill ...
Gerlach Mill is located in Tunica County<1>.
A typical abbreviation for Gerlach Mill: Gerlach Ml. (or less commonly used: Gerlach Mll.)
Gerlach Mill is 170 feet [52 m] above sea level.<2>.
Time Zone: Gerlach Mill lies in the Central Time Zone (CST/CDT) and observes daylight saving time
Area Code for Gerlach Mill: 662
Communities near Gerlach Mill ...
We have created a list of 10 communities that are near Gerlach Mill.
- Helena - West Helena
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Helena - West Helena have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Helena - West Helena
- Helena - West Helena is located in Phillips County (AR)
- Population from the 2020 Census: 10,032 people
- West Helena
(17 miles [27.4 km] to the west)
- Helena
(14 miles [22.5 km] to the west)
- Marks
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Marks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marks
- Marks is located in Quitman County
- Population from the 2020 Census: 1,408 people
- Jump to TripAdvisor's Tourism page for Marks <4>
- Jonestown
(14 miles [22.5 km] to the southwest)
- Friars Point
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Friars Point
- Friars Point is located in Coahoma County
- Population from the 2020 Census: 990 people
- Crenshaw
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Crenshaw have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crenshaw
- Crenshaw is located in Panola County
- Population from the 2020 Census: 845 people
- Jump to TripAdvisor's Tourism page for Crenshaw <4>
- Tunica
(13 miles [20.9 km] to the north)
- Sledge
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Sledge
- Sledge is located in Quitman County
- Population from the 2020 Census: 472 people
- Coahoma
(14 miles [22.5 km] to the southwest)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Gerlach Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Gerlach Mill.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Gerlach Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Gerlach Mill.
We also have a detailed list of newspapers that have been published in the area around Gerlach Mill. See our Newspapers Page for Gerlach Mill.
TripAdvisor Tourism Pages for Gerlach Mill ...
Looking for more information about Gerlach Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
While we are unaware of a Tourism page that is specific to Gerlach Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Gerlach Mill.
Footnotes ...
| <1> | If you're interested in how the shape of Mississippi's counties, including Tunica, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Gerlach Mill - it will be higher in some places and lower in others. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |