|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Fearns Springs had a population of 129 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Fearns Springs, with the one closest to Fearns Springs listed first.
- Hashuqua ‑ Historic
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Hashuqua have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hashuqua
- Hashuqua is located in Noxubee County
- Handle
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Handle. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Handle
- Handle is located in Winston County
- Google driving directions:
- From your current location to Handle
- From Fearns Springs to Handle
- Randalls Bluff ‑ Historic
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Randalls Bluff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Randalls Bluff
- Randalls Bluff is located in Winston County
- Perkinsville ‑ Historic
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Perkinsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perkinsville
- Perkinsville is located in Winston County
- Mashulaville
(7 miles [11.3 km] to the northeast)
- Preston
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Preston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Preston
- Preston is located in Kemper County
- Gholson
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Gholson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gholson
- Gholson is located in Noxubee County
- North Bend
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for North Bend have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Bend
- North Bend is located in Neshoba County
- Singleton ‑ Historic
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Singleton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Singleton
- Singleton is located in Winston County
- Noxapater
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Noxapater have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Noxapater
- Noxapater is located in Winston County
- Population from the 2020 Census: 434 people
- Jump to TripAdvisor's Tourism page for Noxapater <4>
- Peden ‑ Historic
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Peden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peden
- Peden is located in Kemper County
- Louisville
(14 miles [22.5 km] to the northwest)
- Betheden
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Betheden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Betheden
- Betheden is located in Winston County
- Shuqualak
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Shuqualak. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Shuqualak
- Shuqualak is located in Noxubee County
- Population from the 2020 Census: 422 people
- Google driving directions:
- From your current location to Shuqualak
- From Fearns Springs to Shuqualak
- Webster
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Webster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Webster
- Webster is located in Winston County
- Lynn Creek
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Lynn Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lynn Creek
- Lynn Creek is located in Noxubee County
- Loakfoma
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Loakfoma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loakfoma
- Loakfoma is located in Winston County
- Macon
(18 miles [29 km] to the northeast)
- Wahalak
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Wahalak. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wahalak
- Wahalak is located in Kemper County
- Google driving directions:
- From your current location to Wahalak
- From Fearns Springs to Wahalak
- Plattsburg
(20 miles [32.2 km] to the west)
- Ocobla
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ocobla. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ocobla
- Ocobla is located in Neshoba County
- Google driving directions:
- From your current location to Ocobla
- From Fearns Springs to Ocobla
- Spinks ‑ Historic
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Spinks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spinks
- Spinks is located in Kemper County
- Moscow
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Moscow have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moscow
- Moscow is located in Kemper County
- Fairport ‑ Historic
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Fairport. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fairport
- Fairport is located in Noxubee County
- Google driving directions:
- From your current location to Fairport
- From Fearns Springs to Fairport
- Philadelphia
(22 miles [35.4 km] to the southwest)
- Mount Nebo
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Mount Nebo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Nebo
- Mount Nebo is located in Kemper County
- Brooksville
(22 miles [35.4 km] to the northeast)
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fearns Springs, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|