|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McCord Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McCord Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McCord Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Dumas
(Less than 2 miles to the east)
- Dumas is located in Tippah County
- Jump to our Gazetteer entry for Dumas
- Population from the 2020 Census: 474 people
- Clarysville
(2 miles [3.2 km] to the west)
- Clarysville is located in Tippah County
- Jump to our Gazetteer entry for Clarysville
- Molino
(4 miles [6.4 km] to the south)
- Molino is located in Union County
- Jump to our Gazetteer entry for Molino
- Graham
(7 miles [11.3 km] to the southeast)
- Graham is located in Union County
- Jump to our Gazetteer entry for Graham
- Ripley
(7 miles [11.3 km] to the northwest)
- Lowrey
(9 miles [14.5 km] to the west)
- Lowrey is located in Tippah County
- Jump to our Gazetteer entry for Lowrey
- Blue Mountain
(9 miles [14.5 km] to the west)
- Blue Mountain is located in Tippah County
- Jump to our Gazetteer entry for Blue Mountain
- Population from the 2020 Census: 933 people
- Alpine
(11 miles [17.7 km] to the south)
- Alpine is located in Union County
- Jump to our Gazetteer entry for Alpine
- Geeville
(11 miles [17.7 km] to the southeast)
- Geeville is located in Prentiss County
- Jump to our Gazetteer entry for Geeville
- Blackland
(11 miles [17.7 km] to the east)
- Blackland is located in Prentiss County
- Jump to our Gazetteer entry for Blackland
- Jumpertown
(12 miles [19.3 km] to the east)
- Jumpertown is located in Prentiss County
- Jump to our Gazetteer entry for Jumpertown
- Population from the 2020 Census: 477 people
- Glenfield
(13 miles [20.9 km] to the southwest)
- Glenfield is located in Union County
- Jump to our Gazetteer entry for Glenfield
- New Albany
(13 miles [20.9 km] to the southwest)
- Mound City
(13 miles [20.9 km] to the south)
- Mound City is located in Union County
- Jump to our Gazetteer entry for Mound City
- Ellistown
(13 miles [20.9 km] to the south)
- Ellistown is located in Union County
- Jump to our Gazetteer entry for Ellistown
- Corrona
(13 miles [20.9 km] to the southeast)
- Corrona is located in Lee County
- Jump to our Gazetteer entry for Corrona
- Falkner
(14 miles [22.5 km] to the north)
- Boggan Bend
(14 miles [22.5 km] to the southeast)
- Boggan Bend is located in Lee County
- Jump to our Gazetteer entry for Boggan Bend
- Pisgah
(14 miles [22.5 km] to the northeast)
- Pisgah is located in Prentiss County
- Jump to our Gazetteer entry for Pisgah
- Whitten Town
(14 miles [22.5 km] to the northwest)
- Whitten Town is located in Tippah County
- Jump to our Gazetteer entry for Whitten Town
- Gravestown
(14 miles [22.5 km] to the northwest)
- Gravestown is located in Tippah County
- Jump to our Gazetteer entry for Gravestown
- Myrtle
(15 miles [24.1 km] to the southwest)
- Jug Fork
(15 miles [24.1 km] to the south)
- Jug Fork is located in Lee County
- Jump to our Gazetteer entry for Jug Fork
- Wheeler
(15 miles [24.1 km] to the east)
- Wheeler is located in Prentiss County
- Jump to our Gazetteer entry for Wheeler
- Blue Springs
(16 miles [25.7 km] to the south)
- Baldwyn
(16 miles [25.7 km] to the southeast)
- Hightown
(16 miles [25.7 km] to the northeast)
- Hightown is located in Alcorn County
- Jump to our Gazetteer entry for Hightown
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- McCord Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|