Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Forest Hill Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Forest Hill Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Forest Hill Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Corinth
(Less than 2 miles to the west)- Jump to our Gazetteer entry for Corinth
- Corinth is located in Alcorn County
- Population from the 2020 Census: 14,435 people
- Jump to TripAdvisor's Tourism page for Corinth <2>
- Farmington
(3 miles [4.8 km] to the east)- Note: The GPS coordinates that we are using for Farmington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmington
- Farmington is located in Alcorn County
- Population from the 2020 Census: 2,160 people
- Allentown
(7 miles [11.3 km] to the southwest)- Jump to our Gazetteer entry for Allentown
- Allentown is located in Alcorn County
- Biggersville
(7 miles [11.3 km] to the southwest)- Jump to our Gazetteer entry for Biggersville
- Biggersville is located in Alcorn County
- Glen
(7 miles [11.3 km] to the southeast) - Glens
(7 miles [11.3 km] to the southeast) - Guys
(7 miles [11.3 km] to the northwest)- Jump to our Gazetteer entry for Guys
- Guys is located in McNairy County (TN)
- Population from the 2020 Census: 430 people
- Kossuth
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Kossuth
- Kossuth is located in Alcorn County
- Population from the 2020 Census: 201 people
- Jump to TripAdvisor's Tourism page for Kossuth <2>
- Searcy Town
(8 miles [12.9 km] to the south)- Note: The GPS coordinates that we are using for Searcy Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Searcy Town
- Searcy Town is located in Alcorn County
- Michie
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Michie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Michie
- Michie is located in McNairy County (TN)
- Population from the 2020 Census: 629 people
- Jump to TripAdvisor's Tourism page for Michie <2>
- Chewalla
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Chewalla
- Chewalla is located in McNairy County (TN)
- Eastview
(10 miles [16.1 km] to the north) - Rienzi
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Rienzi
- Rienzi is located in Alcorn County
- Population from the 2020 Census: 304 people
- Ramer
(11 miles [17.7 km] to the northwest)- Note: The GPS coordinates that we are using for Ramer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ramer
- Ramer is located in McNairy County (TN)
- Population from the 2020 Census: 293 people
- Jump to TripAdvisor's Tourism page for Ramer <2>
- Hightown
(12 miles [19.3 km] to the southwest) - Jacinto
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Jacinto
- Jacinto is located in Alcorn County
- Burnsville
(12 miles [19.3 km] to the southeast)- Note: The GPS coordinates that we are using for Burnsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnsville
- Burnsville is located in Tishomingo County
- Population from the 2020 Census: 924 people
- Jump to TripAdvisor's Tourism page for Burnsville <2>
- Shiloh
(14 miles [22.5 km] to the northeast)- Jump to our Gazetteer entry for Shiloh
- Shiloh is located in Hardin County (TN)
- Jump to TripAdvisor's Tourism page for Shiloh <2>
- Pisgah
(15 miles [24.1 km] to the southwest)- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Prentiss County
- Falcon
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Falcon
- Falcon is located in McNairy County (TN)
- Nash Landing
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for Nash Landing
- Nash Landing is located in Hardin County (TN)
- Hamburg
(15 miles [24.1 km] to the northeast) - Stantonville
(15 miles [24.1 km] to the north)- Note: The GPS coordinates that we are using for Stantonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stantonville
- Stantonville is located in McNairy County (TN)
- Population from the 2020 Census: 259 people
- Selmer
(16 miles [25.7 km] to the north)- Note: The GPS coordinates that we are using for Selmer have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selmer
- Selmer is located in McNairy County (TN)
- Population from the 2020 Census: 4,280 people
- Jump to TripAdvisor's Tourism page for Selmer <2>
- Slab Town ‑ Historic
(16 miles [25.7 km] to the northeast)
Off-the-Road Links ...
The official website for State of Mississippi: https://www.ms.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Forest Hill Cemetery. The point we use is located at these GPS coordinates - Latitude: 34.9370, Longitude: -88.5064 In this case, the coordinates for the Forest Hill Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |