|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Zig in the Atlas, the following communities of the 1890's would have been found near the current location of Zig. The following communities are listed based on their distance, with the one closest to Zig listed first.
- Loeffler
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Loeffler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loeffler
- Loeffler is located in Adair County
- Nind ‑ Historic
(3 miles [4.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Nind. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nind
- Nind is located in Adair County
- Lindersville ‑ Historic
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Lindersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lindersville
- Lindersville is located in Adair County
- Sticklerville
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sticklerville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sticklerville
- Sticklerville is located in Sullivan County
- Novinger
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Novinger have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Novinger
- Novinger is located in Adair County
- Population from the 2020 Census: 431 people
- Danforth ‑ Historic
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Danforth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Danforth
- Danforth is located in Adair County
- Winigan
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Winigan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winigan
- Winigan is located in Sullivan County
- Walnut
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Walnut have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut
- Walnut is located in Macon County
- Kirksville
(10 miles [16.1 km] to the northeast)
- Sedgwick
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Sedgwick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sedgwick
- Sedgwick is located in Linn County
- Goldsberry
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Goldsberry. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Goldsberry
- Goldsberry is located in Macon County
- Millard
(11 miles [17.7 km] to the east)
- Jump to our Gazetteer entry for Millard
- Millard is located in Adair County
- Population from the 2020 Census: 85 people
- Greencastle
(11 miles [17.7 km] to the northwest)
- Stahl ‑ Historic
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Stahl have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stahl
- Stahl is located in Adair County
- Owasco
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Owasco. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Owasco
- Owasco is located in Sullivan County
- Shibleys Point ‑ Historic
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Shibleys Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shibleys Point
- Shibleys Point is located in Adair County
- North Salem
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for North Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Salem
- North Salem is located in Linn County
- New Boston
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for New Boston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Boston
- New Boston is located in Linn County
- Elmer
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Elmer
- Elmer is located in Macon County
- Population from the 2020 Census: 77 people
- Cottage
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Cottage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cottage
- Cottage is located in Macon County
- Green City
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Green City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Green City
- Green City is located in Sullivan County
- Population from the 2020 Census: 582 people
- Bullion ‑ Historic
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Bullion. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bullion
- Bullion is located in Adair County
- Sidney
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Sidney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sidney
- Sidney is located in Putnam County
- Sublette ‑ Historic
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Sublette have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sublette
- Sublette is located in Adair County
- Ethel
(16 miles [25.7 km] to the south)
- La Plata
(16 miles [25.7 km] to the southeast)
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Zig, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|