Nearby Communities in the 1890s

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Wintersville had a population of 60 people in 1895 with a post office and no railroad service.

The following communities are listed based on their distance from Wintersville, with the one closest to Wintersville listed first.

Harris
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for Harris
- Harris is located in Sullivan County
- Population from the 2020 Census: 55 people
- Jump to TripAdvisor's Tourism page for Harris <2>
Osgood
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Osgood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osgood
- Osgood is located in Sullivan County
- Population from the 2020 Census: 42 people
Judson
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Judson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Judson
- Judson is located in Sullivan County
Half Rock
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Half Rock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Half Rock
- Half Rock is located in Mercer County
Newtown
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Newtown
- Newtown is located in Sullivan County
- Population from the 2020 Census: 163 people
- Jump to TripAdvisor's Tourism page for Newtown <2>
Humphreys
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Humphreys
- Humphreys is located in Sullivan County
- Population from the 2020 Census: 107 people
Topsy
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Topsy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Topsy
- Topsy is located in Mercer County
Galt
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Galt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galt
- Galt is located in Grundy County
- Population from the 2020 Census: 241 people
- Jump to TripAdvisor's Tourism page for Galt <2>
Reger
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Reger have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reger
- Reger is located in Sullivan County
Milan
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Milan
- Milan is located in Sullivan County
- Population from the 2020 Census: 1,764 people
- Jump to TripAdvisor's Tourism page for Milan <2>
Boynton
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Boynton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Boynton
- Boynton is located in Sullivan County
Quinn
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Quinn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quinn
- Quinn is located in Putnam County
Dunlap
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Dunlap
- Dunlap is located in Grundy County
Lindley
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Lindley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lindley
- Lindley is located in Grundy County
Lucerne
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Lucerne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lucerne
- Lucerne is located in Putnam County
- Population from the 2020 Census: 80 people
Wyandotte
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Wyandotte have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyandotte
- Wyandotte is located in Grundy County
Pollock
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Pollock have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pollock
- Pollock is located in Sullivan County
- Population from the 2020 Census: 79 people
Ravanna
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Ravanna
- Ravanna is located in Mercer County
Mill Grove
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Mill Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Grove
- Mill Grove is located in Mercer County
Spickard
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Spickard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spickard
- Spickard is located in Grundy County
- Population from the 2020 Census: 236 people
- Jump to TripAdvisor's Tourism page for Spickard <2>
Cora
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Cora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cora
- Cora is located in Sullivan County
Tindall
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Tindall. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Tindall
- Tindall is located in Grundy County
- Population from the 2020 Census: 74 people
Haseville
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Haseville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Haseville
- Haseville is located in Linn County
Princeton
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Princeton
- Princeton is located in Mercer County
- Population from the 2020 Census: 1,078 people
- Jump to TripAdvisor's Tourism page for Princeton <2>
Laredo
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Laredo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laredo
- Laredo is located in Grundy County
- Population from the 2020 Census: 184 people
Lemons
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Lemons have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lemons
- Lemons is located in Putnam County

Off-the-Road Links ...

The official website for State of Missouri: https://www.mo.gov/

Footnotes ...

<1>	We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wintersville, please let us know so that we can improve our accuracy.
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.