RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Missouri >> Wayne County >> Williamsville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Missouri

The Commemorative Quarter for Missouri





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Williamsville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Williamsville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Williamsville is located in Wayne County.

To see how the shape of Missouri's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Wayne County: Bollinger, Butler, Carter, Iron, Madison, Reynolds & Stoddard.

Below are the counties that are near Williamsville. For each of these counties, we show a sample of those communities that are closest to Williamsville:

  • Wayne County     (The home county of Williamsville)
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Dees Town
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Dees Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dees Town
      • Dees Town is located in Wayne County
    • Mill Spring
      (9 miles [14.5 km] to the northwest)
      • Jump to our Gazetteer entry for Mill Spring
      • Mill Spring is located in Wayne County
      • Population from the 2020 Census: 175 people
    • Greenville
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenville
      • Greenville is located in Wayne County
      • Population from the 2020 Census: 455 people
      • Jump to TripAdvisor's Tourism page for Greenville <2>
    • Shook
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Shook have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shook
      • Shook is located in Wayne County
    • Patterson
      (14 miles [22.5 km] to the north)
    • Silva
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Silva
      • Silva is located in Wayne County
    • Piedmont
      (14 miles [22.5 km] to the northwest)
    • Wappapello
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Wappapello have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wappapello
      • Wappapello is located in Wayne County
      • Jump to TripAdvisor's Tourism page for Wappapello <2>
    • Hiram
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hiram have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hiram
      • Hiram is located in Wayne County
    • Lowndes
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Lowndes have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lowndes
      • Lowndes is located in Wayne County
    • Lodi
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Lodi have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lodi
      • Lodi is located in Wayne County
    • Clubb
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Clubb have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Clubb
      • Clubb is located in Wayne County
  • Bollinger County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Gipsy
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Gipsy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gipsy
      • Gipsy is located in Bollinger County
    • Zalma
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Zalma have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Zalma
      • Zalma is located in Bollinger County
      • Estimated population in 2016: 89 people
    • Sturdivant
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Sturdivant have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sturdivant
      • Sturdivant is located in Bollinger County
    • Greenbrier
      (30 miles [48.3 km] to the east)
      • Jump to our Gazetteer entry for Greenbrier
      • Greenbrier is located in Bollinger County
    • Grassy
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Grassy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grassy
      • Grassy is located in Bollinger County
  • Butler County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Poplar Bluff
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Poplar Bluff have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Poplar Bluff
      • Poplar Bluff is located in Butler County
      • Population from the 2020 Census: 16,807 people
      • Jump to TripAdvisor's Tourism page for Poplar Bluff <2>
    • Kelly Town
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kelly Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kelly Town
      • Kelly Town is located in Butler County
    • Rombauer
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Rombauer
      • Rombauer is located in Butler County
    • Harviell
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Harviell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harviell
      • Harviell is located in Butler County
      • Jump to TripAdvisor's Tourism page for Harviell <2>
    • Fisk
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Fisk have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fisk
      • Fisk is located in Butler County
      • Population from the 2020 Census: 329 people
      • Jump to TripAdvisor's Tourism page for Fisk <2>
    • Broseley
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Broseley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Broseley
      • Broseley is located in Butler County
      • Jump to TripAdvisor's Tourism page for Broseley <2>
    • Neelyville
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Neelyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Neelyville
      • Neelyville is located in Butler County
      • Population from the 2020 Census: 470 people
      • Jump to TripAdvisor's Tourism page for Neelyville <2>
    • Oglesville
      (30 miles [48.3 km] to the southeast)
      • Jump to our Gazetteer entry for Oglesville
      • Oglesville is located in Butler County
    • Qulin
      (30 miles [48.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Qulin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Qulin
      • Qulin is located in Butler County
      • Population from the 2020 Census: 459 people
  • Carter County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Ellsinore
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Ellsinore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ellsinore
      • Ellsinore is located in Carter County
      • Population from the 2020 Census: 426 people
      • Jump to TripAdvisor's Tourism page for Ellsinore <2>
    • Grandin
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Grandin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grandin
      • Grandin is located in Carter County
      • Population from the 2020 Census: 231 people
    • Chicopee
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Chicopee
      • Chicopee is located in Carter County
    • Van Buren
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Buren
      • Van Buren is located in Carter County
      • Population from the 2020 Census: 798 people
      • Jump to TripAdvisor's Tourism page for Van Buren <2>
  • Iron County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Des Arc
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Des Arc
      • Des Arc is located in Iron County
      • Population from the 2020 Census: 162 people
    • Vulcan
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Vulcan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vulcan
      • Vulcan is located in Iron County
    • Annapolis
      (27 miles [43.5 km] to the north)
      • Note: The GPS coordinates that we are using for Annapolis have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Annapolis
      • Annapolis is located in Iron County
      • Population from the 2020 Census: 336 people
      • Jump to TripAdvisor's Tourism page for Annapolis <2>
    • Sabula
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Sabula
      • Sabula is located in Iron County
  • Madison County
    • Saco
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Saco
      • Saco is located in Madison County
  • Reynolds County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Ellington
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Ellington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ellington
      • Ellington is located in Reynolds County
      • Population from the 2020 Census: 915 people
      • Jump to TripAdvisor's Tourism page for Ellington <2>
    • Redford
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Redford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Redford
      • Redford is located in Reynolds County
  • Ripley County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Fairdealing
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Fairdealing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fairdealing
      • Fairdealing is located in Ripley County
    • Gamburg
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Gamburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gamburg
      • Gamburg is located in Ripley County
    • Naylor
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Naylor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Naylor
      • Naylor is located in Ripley County
      • Population from the 2020 Census: 585 people
    • Oxly
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Oxly have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oxly
      • Oxly is located in Ripley County
    • Doniphan
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Doniphan have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Doniphan
      • Doniphan is located in Ripley County
      • Population from the 2020 Census: 1,919 people
      • Jump to TripAdvisor's Tourism page for Doniphan <2>
    • Bennett
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Bennett
      • Bennett is located in Ripley County
  • Stoddard County
    • The following are listed by their distance from Williamsville, with the one closest to Williamsville listed first.
    • Puxico
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Puxico have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Puxico
      • Puxico is located in Stoddard County
      • Population from the 2020 Census: 847 people
      • Jump to TripAdvisor's Tourism page for Puxico <2>
    • Dudley
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Dudley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dudley
      • Dudley is located in Stoddard County
      • Population from the 2020 Census: 222 people
    • Leora
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Leora have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leora
      • Leora is located in Stoddard County

For an expanded list of the communities that are closest to Williamsville, see our County-by-County Page for Williamsville.

Newspapers Published in the Vicinity of Williamsville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 47 newspapers that have been published in the area around Williamsville.

We have organized these newspapers into two lists:

  • A Local Newspaper List - focusing on the papers published in the immediate area of Williamsville. There are actually two parts to this list - papers printed in the immediate area of Williamsville and those printed in the larger area surrounding Williamsville.
  • An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 28 miles [45.1 km]<3> of Williamsville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Williamsville:

Cemeteries Near Williamsville ...

Below are cemeteries that are in the vicinity of Williamsville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Williamsville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Williamsville, with the one closest to Williamsville listed first.

  • Holladay Cemetery
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for the Holladay Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Holladay Cemetery
  • Miller Creek Cemetery
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for the Miller Creek Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Miller Creek Cemetery
  • Sloan Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Sloan Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sloan Cemetery
  • Sloan Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Sloan Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Sloan Cemetery
  • Davidson Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Davidson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Davidson Cemetery
  • Black River Cemetery
    (4 miles [6.4 km] to the southeast)
  • Smith Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Smith Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Smith Cemetery
  • Cool Spring Cemetery
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for the Cool Spring Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cool Spring Cemetery
  • Henson Cemetery
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for the Henson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Henson Cemetery
  • Dees Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Dees Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Dees Cemetery
  • Military Crossing Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Military Crossing Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Military Crossing Cemetery
  • Keele Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Keele Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Keele Cemetery
  • Continue List   (297 more) ...
    • Rucker Cemetery
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for the Rucker Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Rucker Cemetery
    • Smoot Cemetery
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Smoot Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Smoot Cemetery
    • Risby Cemetery
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for the Risby Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Risby Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

The Rand McNally Atlas shows that Williamsville had a population of 435 people in 1895 with a post office and railroad service. In 2020, Williamsville had a population of 327 people.

These communities are listed based on their distance from Williamsville, with the one closest to Williamsville listed first.

  • Keeners
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Keeners have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keeners
    • Keeners is located in Butler County
  • Barlow ‑ Historic
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Barlow have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barlow
    • Barlow is located in Wayne County
  • Kerrigan ‑ Historic
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Kerrigan have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kerrigan
    • Kerrigan is located in Wayne County
  • Upalika
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Upalika have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Upalika
    • Upalika is located in Wayne County
  • Taskee Station ‑ Historic
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Taskee Station have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taskee Station
    • Taskee Station is located in Wayne County
  • Hendrickson
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hendrickson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hendrickson
    • Hendrickson is located in Butler County
  • Mill Spring
    (9 miles [14.5 km] to the northwest)
    • Jump to our Gazetteer entry for Mill Spring
    • Mill Spring is located in Wayne County
    • Population from the 2020 Census: 175 people
  • Halloran
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Halloran have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Halloran
    • Halloran is located in Butler County
  • Leeper
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Leeper have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Leeper
    • Leeper is located in Wayne County
  • Hilliard
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hilliard have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hilliard
    • Hilliard is located in Butler County
  • Greenville
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Greenville
    • Greenville is located in Wayne County
    • Population from the 2020 Census: 455 people
    • Jump to TripAdvisor's Tourism page for Greenville <2>
  • Patterson
    (14 miles [22.5 km] to the north)
  • Continue List   (14 more) ...
    • Piedmont
      (14 miles [22.5 km] to the northwest)
    • Wappapello
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Wappapello have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wappapello
      • Wappapello is located in Wayne County
      • Jump to TripAdvisor's Tourism page for Wappapello <2>
    • Poplar Bluff
      (16 miles [25.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Poplar Bluff have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Poplar Bluff
      • Poplar Bluff is located in Butler County
      • Population from the 2020 Census: 16,807 people
      • Jump to TripAdvisor's Tourism page for Poplar Bluff <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Williamsville. See our List of 1890's Communities around Williamsville.

Unfortunately, we don't know of a website for Williamsville. If you can help, please contact us through our Feedback Page.

The official website for State of Missouri: https://www.mo.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Williamsville) to Point B.Our distance measurements begin at a specific point in Williamsville. The point we use is located at these GPS coordinates - Latitude: 36.9737, Longitude: -90.5478       In this case, the coordinates for Williamsville have been provided by the Geographic Names Information System (GNIS).
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Williamsville, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024