Nearest Communities to Smithboro,
Listed County-By-County
The purpose of this page is to identify those communities that are closest to Smithboro, on a County-by-County basis. To explain further, let's use the example from the Genealogy Helper Page for Smithboro:
We have great-grandparents who lived in a small community in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
When doing our research, we make it a practice to expand our search by looking in neighboring counties in addition to the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't checked the neighboring counties, we would have missed many valuable sources of information.
Please note that when we give a distance, it's a 'straight-line' distance from Smithboro.<1>
If you're researching your genealogy, we hope that the following information helps.
Smithboro is located in Reynolds County.
The following 5 counties adjoin and form the boundaries of Reynolds County: Carter, Dent, Iron, Shannon & Wayne.
Our Gazetteer shows that there are 160 communities within 40 miles [64.4 km]<1> of Smithboro. Of these communities, 125 are located in counties other than Reynolds County.
We usually exclude communities where we still need to verify their location,<2> but for the purpose of this page, we have included the unverified ('unver') and historic ('hist') communities.
After starting with the home county for Smithboro (which is Reynolds County), we list the counties in alphabetical order and for each of those counties, the closest communities are listed in order of their distance from Smithboro
For the following list, only those counties that contain communities within 40 miles [64.4 km] are displayed.
- Reynolds County (where Smithboro resides)
- County Seat for Reynolds: Centerville
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Lake Springs
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Lake Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Springs
- Lake Springs is located in Reynolds County
- Lesterville
(4 miles [6.4 km] to the north)
- Redford
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Redford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redford
- Redford is located in Reynolds County
- Pinkley ‑ Historic
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Pinkley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinkley
- Pinkley is located in Reynolds County
- Centerville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Centerville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Centerville
- Centerville is located in Reynolds County
- Population from the 2020 Census: 179 people
- Jump to TripAdvisor's Tourism page for Centerville <4>
- Alamode ‑ Historic
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Alamode have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alamode
- Alamode is located in Reynolds County
- Black
(11 miles [17.7 km] to the northwest)
- Riverside ‑ Historic
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverside
- Riverside is located in Reynolds County
- Monterey
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Monterey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monterey
- Monterey is located in Reynolds County
- Bedwell
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Bedwell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bedwell
- Bedwell is located in Reynolds County
- Ellington
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Ellington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellington
- Ellington is located in Reynolds County
- Population from the 2020 Census: 915 people
- Jump to TripAdvisor's Tourism page for Ellington <4>
- Fruit City
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Fruit City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fruit City
- Fruit City is located in Reynolds County
- Continue List (23 more) ...
- Corridon
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Corridon
- Corridon is located in Reynolds County
- Oakdale ‑ Historic
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Oakdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakdale
- Oakdale is located in Reynolds County
- Reynolds
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Reynolds
- Reynolds is located in Reynolds County
- Munger
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Munger
- Munger is located in Reynolds County
- Edgehill
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Edgehill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edgehill
- Edgehill is located in Reynolds County
- Bee Fork
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Bee Fork
- Bee Fork is located in Reynolds County
- Dairyville ‑ Historic
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Dairyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dairyville
- Dairyville is located in Reynolds County
- Chitwood
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Chitwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chitwood
- Chitwood is located in Reynolds County
- Ohlman
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Ohlman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ohlman
- Ohlman is located in Reynolds County
- Oates
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Oates
- Oates is located in Reynolds County
- West Fork
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for West Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Fork
- West Fork is located in Reynolds County
- Grady
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Grady have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grady
- Grady is located in Reynolds County
- Ruble
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Ruble have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ruble
- Ruble is located in Reynolds County
- Webb ‑ Historic
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Webb have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Webb
- Webb is located in Reynolds County
- Dagonia
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Dagonia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dagonia
- Dagonia is located in Reynolds County
- Helvey ‑ Historic
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Helvey have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Helvey
- Helvey is located in Reynolds County
- Oakley
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Oakley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakley
- Oakley is located in Reynolds County
- Melton
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Melton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melton
- Melton is located in Reynolds County
- Greeley
(21 miles [33.8 km] to the west)
- Jump to our Gazetteer entry for Greeley
- Greeley is located in Reynolds County
- Garwood
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Garwood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garwood
- Garwood is located in Reynolds County
- Hadley
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Hadley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hadley
- Hadley is located in Reynolds County
- Bunker Camp ‑ Historic
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Bunker Camp have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunker Camp
- Bunker Camp is located in Reynolds County
- Marcoot
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Marcoot have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marcoot
- Marcoot is located in Reynolds County
- Carter County
- County Seat for Carter: Van Buren
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Keeney Corner
(23 miles [37 km] to the south)
- Note: The GPS coordinates that we are using for Keeney Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Keeney Corner
- Keeney Corner is located in Carter County
- Van Buren
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Carter County
- Population from the 2020 Census: 798 people
- Jump to TripAdvisor's Tourism page for Van Buren <4>
- House Creek
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for House Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for House Creek
- House Creek is located in Carter County
- Chicopee
(29 miles [46.7 km] to the south)
- Jump to our Gazetteer entry for Chicopee
- Chicopee is located in Carter County
- South Van Buren
(29 miles [46.7 km] to the south)
- Note: The GPS coordinates that we are using for South Van Buren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Van Buren
- South Van Buren is located in Carter County
- Crites Corner
(30 miles [48.3 km] to the south)
- Note: The GPS coordinates that we are using for Crites Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crites Corner
- Crites Corner is located in Carter County
- Crawford County
- County Seat for Crawford: Steelville
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- Czar
(29 miles [46.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Czar. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Czar
- Czar is located in Crawford County
- Dent County
- County Seat for Dent: Salem
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Bunker
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for Bunker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bunker
- Bunker is located in Dent County
- Population from the 2020 Census: 382 people
- Jump to TripAdvisor's Tourism page for Bunker <4>
- West Bunker
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for West Bunker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Bunker
- West Bunker is located in Dent County
- Boss
(26 miles [41.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Boss have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boss
- Boss is located in Dent County
- Falk Mill ‑ Historic
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Falk Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falk Mill
- Falk Mill is located in Dent County
- Gila
(26 miles [41.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Gila. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Gila
- Gila is located in Dent County
- Howes Mill
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Howes Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howes Mill
- Howes Mill is located in Dent County
- Iron County
- County Seat for Iron: Ironton
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Annapolis
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Annapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annapolis
- Annapolis is located in Iron County
- Population from the 2020 Census: 336 people
- Jump to TripAdvisor's Tourism page for Annapolis <4>
- Sabula
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Sabula
- Sabula is located in Iron County
- Chloride
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Chloride
- Chloride is located in Iron County
- Berryman
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Berryman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berryman
- Berryman is located in Iron County
- Glover
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Glover have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glover
- Glover is located in Iron County
- Allen Mills
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Allen Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allen Mills
- Allen Mills is located in Iron County
- Hogan
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Hogan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hogan
- Hogan is located in Iron County
- Vulcan
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Vulcan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vulcan
- Vulcan is located in Iron County
- Des Arc
(12 miles [19.3 km] to the southeast)
- Jump to our Gazetteer entry for Des Arc
- Des Arc is located in Iron County
- Population from the 2020 Census: 162 people
- Minimum
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Minimum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minimum
- Minimum is located in Iron County
- Arcadia
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Arcadia. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Iron County
- Population from the 2020 Census: 552 people
- Jump to TripAdvisor's Tourism page for Arcadia <4>
- Ironton
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Ironton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ironton
- Ironton is located in Iron County
- Population from the 2020 Census: 1,386 people
- Jump to TripAdvisor's Tourism page for Ironton <4>
- Continue List (23 more) ...
- Russellville
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Russellville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Russellville
- Russellville is located in Iron County
- Redmondville
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Redmondville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Redmondville
- Redmondville is located in Iron County
- English Town
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for English Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for English Town
- English Town is located in Iron County
- Pilot Knob
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Pilot Knob have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pilot Knob
- Pilot Knob is located in Iron County
- Population from the 2020 Census: 711 people
- Jump to TripAdvisor's Tourism page for Pilot Knob <4>
- Snow Hollow Lake
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Snow Hollow Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Snow Hollow Lake
- Snow Hollow Lake is located in Iron County
- Wilsonville
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Wilsonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilsonville
- Wilsonville is located in Iron County
- Ghermanville
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Ghermanville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ghermanville
- Ghermanville is located in Iron County
- Graniteville
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Graniteville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Graniteville
- Graniteville is located in Iron County
- Killarney Shores
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Killarney Shores have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Killarney Shores
- Killarney Shores is located in Iron County
- Goodland ‑ Historic
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Goodland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodland
- Goodland is located in Iron County
- Belleview
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Belleview
- Belleview is located in Iron County
- Pin Hook
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Pin Hook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pin Hook
- Pin Hook is located in Iron County
- Banner
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Banner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Banner
- Banner is located in Iron County
- Shepard ‑ Historic
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Shepard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shepard
- Shepard is located in Iron County
- Middle Brook
(21 miles [33.8 km] to the northeast)
- Enough
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Enough have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Enough
- Enough is located in Iron County
- Buick
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Buick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buick
- Buick is located in Iron County
- East End
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for East End have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East End
- East End is located in Iron County
- Maxwells Mill
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Maxwells Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxwells Mill
- Maxwells Mill is located in Iron County
- Bixby
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Bixby have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bixby
- Bixby is located in Iron County
- Jump to TripAdvisor's Tourism page for Bixby <4>
- Good Water
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Good Water. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Good Water
- Good Water is located in Iron County
- Red Point
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Red Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Point
- Red Point is located in Iron County
- Viburnum
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Viburnum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viburnum
- Viburnum is located in Iron County
- Population from the 2020 Census: 648 people
- Jump to TripAdvisor's Tourism page for Viburnum <4>
- Madison County
- County Seat for Madison: Fredericktown
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Jewett
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Jewett have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jewett
- Jewett is located in Madison County
- Beulah
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Beulah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beulah
- Beulah is located in Madison County
- French Mills
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for French Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for French Mills
- French Mills is located in Madison County
- Marsh Creek
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Marsh Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marsh Creek
- Marsh Creek is located in Madison County
- Shelton Ford
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Shelton Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelton Ford
- Shelton Ford is located in Madison County
- Varsh Ford
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Varsh Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Varsh Ford
- Varsh Ford is located in Madison County
- Wide Ford
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Wide Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wide Ford
- Wide Ford is located in Madison County
- Braddy Ford ‑ Historic
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Braddy Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Braddy Ford
- Braddy Ford is located in Madison County
- Faro
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Faro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Faro
- Faro is located in Madison County
- Saco
(21 miles [33.8 km] to the east)
- Jump to our Gazetteer entry for Saco
- Saco is located in Madison County
- Roselle
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Roselle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roselle
- Roselle is located in Madison County
- Lance
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Lance have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lance
- Lance is located in Madison County
- Continue List (10 more) ...
- Tin Mountain
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Tin Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tin Mountain
- Tin Mountain is located in Madison County
- Creek Nation
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Creek Nation have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Creek Nation
- Creek Nation is located in Madison County
- Twelvemile
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Twelvemile have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twelvemile
- Twelvemile is located in Madison County
- Central
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Central have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Central
- Central is located in Madison County
- Oak Grove
(26 miles [41.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Oak Grove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Grove
- Oak Grove is located in Madison County
- Zion
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Zion have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zion
- Zion is located in Madison County
- Buckhorn
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Buckhorn have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckhorn
- Buckhorn is located in Madison County
- Cherokee Pass
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Cherokee Pass have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherokee Pass
- Cherokee Pass is located in Madison County
- Millcreek
(29 miles [46.7 km] to the east)
- Jump to our Gazetteer entry for Millcreek
- Millcreek is located in Madison County
- Catherine Place
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Catherine Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catherine Place
- Catherine Place is located in Madison County
- Saint Francois County
- County Seat for Saint Francois: Farmington
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Lopez
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Lopez have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lopez
- Lopez is located in Saint Francois County
- Iron Mountain Lake
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Iron Mountain Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iron Mountain Lake
- Iron Mountain Lake is located in Saint Francois County
- Population from the 2020 Census: 747 people
- Iron Mountain
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Iron Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iron Mountain
- Iron Mountain is located in Saint Francois County
- Mineral City
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Mineral City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mineral City
- Mineral City is located in Saint Francois County
- Bismarck
(28 miles [45.1 km] to the north)
- Doe Run
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Doe Run have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Doe Run
- Doe Run is located in Saint Francois County
- Hamilton Town
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hamilton Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamilton Town
- Hamilton Town is located in Saint Francois County
- Syenite
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Syenite have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Syenite
- Syenite is located in Saint Francois County
- Shannon County
- County Seat for Shannon: Eminence
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Deslet
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Deslet have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deslet
- Deslet is located in Shannon County
- Midridge
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Midridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midridge
- Midridge is located in Shannon County
- Rat
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Rat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rat
- Rat is located in Shannon County
- Himont ‑ Historic
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Himont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Himont
- Himont is located in Shannon County
- Beal
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Beal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beal
- Beal is located in Shannon County
- Owls Bend
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Owls Bend have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Owls Bend
- Owls Bend is located in Shannon County
- Gang
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Gang have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gang
- Gang is located in Shannon County
- Brushy Mill ‑ Historic
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Brushy Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brushy Mill
- Brushy Mill is located in Shannon County
- Mauser Mill
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Mauser Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mauser Mill
- Mauser Mill is located in Shannon County
- Junction Ferry
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Junction Ferry have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Junction Ferry
- Junction Ferry is located in Shannon County
- Shawnee
(30 miles [48.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Shawnee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shawnee
- Shawnee is located in Shannon County
- Washington County
- County Seat for Washington: Potosi
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Caledonia
(25 miles [40.2 km] to the north)
- Holiday Shores
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Holiday Shores have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holiday Shores
- Holiday Shores is located in Washington County
- Peoria
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Peoria have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peoria
- Peoria is located in Washington County
- Belgrade
(27 miles [43.5 km] to the north)
- Horton Town
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Horton Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Horton Town
- Horton Town is located in Washington County
- Sunlight
(27 miles [43.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sunlight. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Sunlight
- Sunlight is located in Washington County
- Quaker
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Quaker have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quaker
- Quaker is located in Washington County
- Delbridge
(29 miles [46.7 km] to the north)
- Note: The GPS coordinates that we are using for Delbridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delbridge
- Delbridge is located in Washington County
- Courtois
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Courtois have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Courtois
- Courtois is located in Washington County
- Wayne County
- County Seat for Wayne: Greenville
- Genealogy Websites ...
- Nearest Communities to Smithboro ...
- These communities are listed by their distance from Smithboro.
- Gads Hill
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Gads Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gads Hill
- Gads Hill is located in Wayne County
- Platow
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Platow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Platow
- Platow is located in Wayne County
- Brunot
(16 miles [25.7 km] to the east)
- Jump to our Gazetteer entry for Brunot
- Brunot is located in Wayne County
- Piedmont
(17 miles [27.4 km] to the southeast)
- Virginia Settlement
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Virginia Settlement have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Virginia Settlement
- Virginia Settlement is located in Wayne County
- Beckville
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Beckville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beckville
- Beckville is located in Wayne County
- Damon
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Damon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Damon
- Damon is located in Wayne County
- Head Ford ‑ Historic
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Head Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Head Ford
- Head Ford is located in Wayne County
- Patterson
(20 miles [32.2 km] to the southeast)
- Rings
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Rings have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rings
- Rings is located in Wayne County
- Gaylor
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Gaylor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gaylor
- Gaylor is located in Wayne County
- Chilton ‑ Historic
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Chilton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chilton
- Chilton is located in Wayne County
- Continue List (15 more) ...
- Leeper
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Leeper have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leeper
- Leeper is located in Wayne County
- Lodi
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Lodi have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lodi
- Lodi is located in Wayne County
- Coldwater
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Coldwater have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coldwater
- Coldwater is located in Wayne County
- Bounds
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Bounds have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bounds
- Bounds is located in Wayne County
- Mill Spring
(24 miles [38.6 km] to the south)
- Jump to our Gazetteer entry for Mill Spring
- Mill Spring is located in Wayne County
- Population from the 2020 Census: 175 people
- Silva
(24 miles [38.6 km] to the southeast)
- Jump to our Gazetteer entry for Silva
- Silva is located in Wayne County
- Missionary Acres
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Missionary Acres have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Missionary Acres
- Missionary Acres is located in Wayne County
- Burch
(27 miles [43.5 km] to the east)
- Note: The GPS coordinates that we are using for Burch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burch
- Burch is located in Wayne County
- Greenville
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Wayne County
- Population from the 2020 Census: 455 people
- Jump to TripAdvisor's Tourism page for Greenville <4>
- Barlow ‑ Historic
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Barlow have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barlow
- Barlow is located in Wayne County
- Dees Town
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Dees Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dees Town
- Dees Town is located in Wayne County
- Old Greenville ‑ Historic
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Old Greenville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Greenville
- Old Greenville is located in Wayne County
- Clubb
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Clubb have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clubb
- Clubb is located in Wayne County
- Kerrigan ‑ Historic
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Kerrigan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kerrigan
- Kerrigan is located in Wayne County
- Burbank
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Burbank have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burbank
- Burbank is located in Wayne County
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Smithboro) to Point B.Our distance measurements begin at a specific point in Smithboro. The point we use is located at these GPS coordinates - Latitude: 37.3923, Longitude: -90.8246 In this case, the coordinates for Smithboro have been provided by the Geographic Names Information System (GNIS). |
<2> | Our data comes from many sources and some sources are more dependable than others. When we add communities to our Gazetteer, we try to verify that we have the correct location for the community. We mark a community as 'Unverified' when we aren't confident about our data and want to do further checking.
We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was larger or had a more 'official' existence in the past than it does now.
Since our Gazetteer contains over 100,000 communities, verifying everything is going to take time. If you find an error or can help us to improve our accuracy, please let us know. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |