RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Missouri >> Newton County >> Redings MillIndex...










Learn About
The Commemorative
Quarter for
Missouri


The Commemorative Quarter for Missouri







Welcome to Redings Mill ...

The village of Redings Mill is located in Newton County<1>.


The location of Redings Mill has been provided by the Geographic Names Information System (the GNIS).<2>


A typical abbreviation for Redings Mill: Redings Ml. (or less commonly used: Redings Mll.)

See our Genealogy Helper Page for Redings Mill for more information about variations on the name of Redings Mill.

From the  Census Estimates for 2019, Redings Mill has a population of 152 people<3> (see below for details).

Redings Mill is 940 feet [287 m] above sea level.<4>.

Time Zone: Redings Mill lies in the Central Time Zone (CST/CDT) and observes daylight saving time

Redings Mill is within the boundaries of the (417) area code.

Population Details ...

Taken from the 2019 Census Estimates, Redings Mill had an population of 152 people. This is an increase of 0.66% since the 2010 Census (or a decrease of 4.4% since the 2000 Census).

At the time of the 2010 Census, Redings Mill had a population of 151 people. This makes Redings Mill the county's 13th most populous community.

With a 2010 count of 151 people, the population of Redings Mill decreased 5.03% from the 2000 Census (which had a count of 159 people).

More information can be found on the Census Page for Redings Mill.

Communities near Redings Mill ...

We have created a list of 10 communities that are near Redings Mill.

  • Joplin
    (4 miles [6.4 km] to the north)
  • Carthage
    (15 miles [24.1 km] to the northeast)
  • Webb City
    (9 miles [14.5 km] to the north)
  • Neosho
    (13 miles [20.9 km] to the southeast)
  • Carl Junction
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Carl Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carl Junction
    • Carl Junction is located in Jasper County
    • Population from the 2020 Census: 8,430 people
    • Jump to TripAdvisor's Tourism page for Carl Junction <5>
  • Baxter Springs
    (12 miles [19.3 km] to the west)
  • Galena
    (7 miles [11.3 km] to the northwest)
    • Jump to our Gazetteer entry for Galena
    • Galena is located in Cherokee County (KS)
    • Population from the 2020 Census: 2,824 people
    • Jump to TripAdvisor's Tourism page for Galena <5>
  • Oronogo
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Oronogo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oronogo
    • Oronogo is located in Jasper County
    • Population from the 2020 Census: 2,666 people
    • Jump to TripAdvisor's Tourism page for Oronogo <5>
  • Seneca
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Seneca have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Seneca
    • Seneca is located in Newton County
    • Population from the 2020 Census: 2,394 people
    • Jump to TripAdvisor's Tourism page for Seneca <5>
  • Granby
    (15 miles [24.1 km] to the southeast)

To Help With Your Genealogy Research ...

We have a couple of sections for those tracing their genealogy.

We created a list of cemeteries that are in the area around Redings Mill. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Redings Mill.

Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Redings Mill. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Redings Mill.

We also have a detailed list of newspapers that have been published in the area around Redings Mill. See our Newspapers Page for Redings Mill.

TripAdvisor Tourism Pages for Redings Mill ...

Looking for more information about Redings Mill? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.

While we are unaware of a Tourism page that is specific to Redings Mill, there are neighboring communities that do have Tourism pages. A map of those communities can be found with our TripAdvisor Page for Redings Mill.

Unfortunately, we don't know of a website for Redings Mill. If you can help, please contact us through our Feedback Page.

The official website for State of Missouri: https://www.mo.gov/

Footnotes ...

<1>If you're interested in how the shape of Missouri's counties, including Newton, have changed over time, we recommend the Atlas of Historical County Boundaries.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Population counts have been provided by the U.S. Census Bureau. For more detail, please visit our Census Page for Redings Mill.
<4>The elevation is an estimate for the area around Redings Mill - it will be higher in some places and lower in others.
<5>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Nov 2024