Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Longview in the Atlas, the following communities of the 1890's would have been found near the current location of Longview. The following communities are listed based on their distance, with the one closest to Longview listed first.
- Bethpage
(2 miles [3.2 km] to the southwest)
- Bethpage is located in McDonald County
- Jump to our Gazetteer entry for Bethpage
- Stella
(2 miles [3.2 km] to the north)
- Rocky Comfort
(6 miles [9.7 km] to the east)
- Rocky Comfort is located in McDonald County
- Jump to our Gazetteer entry for Rocky Comfort
- Wanda
(6 miles [9.7 km] to the north)
- Wanda is located in Newton County
- Jump to our Gazetteer entry for Wanda
- Cyclone
(7 miles [11.3 km] to the south)
- Cyclone is located in McDonald County
- Jump to our Gazetteer entry for Cyclone
- Powell
(7 miles [11.3 km] to the south)
- Powell is located in McDonald County
- Jump to our Gazetteer entry for Powell
- Christopher
(7 miles [11.3 km] to the northwest)
- Christopher is located in Newton County
- Jump to our Gazetteer entry for Christopher
- Grangeville ‑ Historic
(8 miles [12.9 km] to the northeast)
- Grangeville is located in Newton County
- Jump to our Gazetteer entry for Grangeville
- Erie
(8 miles [12.9 km] to the west)
- Erie is located in McDonald County
- Jump to our Gazetteer entry for Erie
- Newtonia
(10 miles [16.1 km] to the north)
- Pioneer
(11 miles [17.7 km] to the northeast)
- Pioneer is located in Barry County
- Jump to our Gazetteer entry for Pioneer
- McElhany
(11 miles [17.7 km] to the west)
- McElhany is located in Newton County
- Jump to our Gazetteer entry for McElhany
- Corsicana
(12 miles [19.3 km] to the northeast)
- Corsicana is located in Barry County
- Jump to our Gazetteer entry for Corsicana
- Granby
(13 miles [20.9 km] to the north)
- Jane
(13 miles [20.9 km] to the southwest)
- Neosho
(13 miles [20.9 km] to the northwest)
- Anderson
(14 miles [22.5 km] to the west)
- Pineville
(14 miles [22.5 km] to the southwest)
- Splitlog
(14 miles [22.5 km] to the west)
- Splitlog is located in McDonald County
- Jump to our Gazetteer entry for Splitlog
- Caverna
(15 miles [24.1 km] to the south)
- Caverna is located in McDonald County
- Jump to our Gazetteer entry for Caverna
- Exeter
(15 miles [24.1 km] to the east)
- Berwick
(15 miles [24.1 km] to the north)
- Berwick is located in Newton County
- Jump to our Gazetteer entry for Berwick
- Ritchey
(15 miles [24.1 km] to the north)
- Ritchey is located in Newton County
- Jump to our Gazetteer entry for Ritchey
- Population from the 2020 Census: 81 people
- Mayflower
(16 miles [25.7 km] to the southeast)
- Mayflower is located in Barry County
- Jump to our Gazetteer entry for Mayflower
- Washburn
(16 miles [25.7 km] to the southeast)
- Butterfield
(16 miles [25.7 km] to the east)
- Butterfield is located in Barry County
- Jump to our Gazetteer entry for Butterfield
- Population from the 2020 Census: 470 people
- Purdy
(16 miles [25.7 km] to the northeast)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Longview, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |