Nearby Communities in the 1890s

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Holliday had a population of 254 people in 1895 with a post office and railroad service. In 2020, Holliday had a population of 133 people.

The following communities are listed based on their distance from Holliday, with the one closest to Holliday listed first.

Madison
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Madison
- Madison is located in Monroe County
- Population from the 2020 Census: 542 people
- Jump to TripAdvisor's Tourism page for Madison <2>
Granville
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Granville
- Granville is located in Monroe County
Paris
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Paris have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paris
- Paris is located in Monroe County
- Population from the 2020 Census: 1,170 people
- Jump to TripAdvisor's Tourism page for Paris <2>
Woodlawn
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Monroe County
Ash
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Ash. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ash
- Ash is located in Monroe County
Evansville
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Evansville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evansville
- Evansville is located in Monroe County
Duncans Bridge
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Duncans Bridge. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Duncans Bridge
- Duncans Bridge is located in Monroe County
Middle Grove
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Middle Grove
- Middle Grove is located in Monroe County
Tulip
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Tulip. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Tulip
- Tulip is located in Audrain County
Maud
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Maud have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maud
- Maud is located in Shelby County
Goss
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Goss have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goss
- Goss is located in Monroe County
Saling ‑ Historic
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Saling. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Saling
- Saling is located in Audrain County
Rowena
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Rowena have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowena
- Rowena is located in Audrain County
Enterprise
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Enterprise. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Enterprise
- Enterprise is located in Shelby County
Levick Mill
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Levick Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Levick Mill
- Levick Mill is located in Randolph County
Strother
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Strother have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Strother
- Strother is located in Monroe County
North Fork
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for North Fork have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Fork
- North Fork is located in Monroe County
Shelbina
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Shelbina have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelbina
- Shelbina is located in Shelby County
- Population from the 2020 Census: 1,582 people
- Jump to TripAdvisor's Tourism page for Shelbina <2>
Woodville
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Macon County
Stoutsville
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Stoutsville
- Stoutsville is located in Monroe County
- Population from the 2020 Census: 40 people
- Jump to TripAdvisor's Tourism page for Stoutsville <2>
Lakenan
(15 miles [24.1 km] to the northeast)
- Jump to our Gazetteer entry for Lakenan
- Lakenan is located in Shelby County
Lentner
(15 miles [24.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Lentner. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lentner
- Lentner is located in Shelby County
Moberly
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Moberly
- Moberly is located in Randolph County
- Population from the 2020 Census: 13,512 people
- Jump to TripAdvisor's Tourism page for Moberly <2>
Victor
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Victor have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Victor
- Victor is located in Monroe County
Clapper
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Clapper have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clapper
- Clapper is located in Monroe County
Cox
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Cox have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cox
- Cox is located in Macon County
Cairo
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Cairo
- Cairo is located in Randolph County
- Population from the 2020 Census: 273 people

Off-the-Road Links ...

Unfortunately, we don't know of an official website for Holliday. If you can help, please contact us through our Feedback Page.

The official website for State of Missouri: https://www.mo.gov/

Footnotes ...

<1>	We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Holliday, please let us know so that we can improve our accuracy.
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>	An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.