Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Glenallen had a population of 87 people in 1895 with a post office and railroad service. In 2020, Glenallen had a population of 83 people.
The following communities are listed based on their distance from Glenallen, with the one closest to Glenallen listed first.
- Lutesville
(2 miles [3.2 km] to the southeast)- Note: The GPS coordinates that we are using for Lutesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lutesville
- Lutesville is located in Bollinger County
- Marble Hill
(2 miles [3.2 km] to the east)- Note: The GPS coordinates that we are using for Marble Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble Hill
- Marble Hill is located in Bollinger County
- Population from the 2020 Census: 1,460 people
- Jump to TripAdvisor's Tourism page for Marble Hill <3>
- Bessville
(5 miles [8 km] to the northwest) - Leopold
(6 miles [9.7 km] to the southeast) - Laflin
(8 miles [12.9 km] to the east) - Gravel Hill
(10 miles [16.1 km] to the east)- Note: The GPS coordinates that we are using for Gravel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gravel Hill
- Gravel Hill is located in Cape Girardeau County
- Marquand
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Marquand
- Marquand is located in Madison County
- Population from the 2020 Census: 197 people
- Buchanan
(11 miles [17.7 km] to the southwest) - Crump
(11 miles [17.7 km] to the east)- Jump to our Gazetteer entry for Crump
- Crump is located in Cape Girardeau County
- Zalma
(12 miles [19.3 km] to the south) - Burfordville
(12 miles [19.3 km] to the east)- Jump to our Gazetteer entry for Burfordville
- Burfordville is located in Cape Girardeau County
- Jump to TripAdvisor's Tourism page for Burfordville <3>
- Patton
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Patton
- Patton is located in Bollinger County
- Jump to TripAdvisor's Tourism page for Patton <3>
- Gravelton
(12 miles [19.3 km] to the west) - Greenbrier
(14 miles [22.5 km] to the south)- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Bollinger County
- Millersville
(14 miles [22.5 km] to the northeast)- Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millersville
- Millersville is located in Cape Girardeau County
- Jump to TripAdvisor's Tourism page for Millersville <3>
- Houck
(15 miles [24.1 km] to the east) - Tilsit
(15 miles [24.1 km] to the east) - Kurreville
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for Kurreville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kurreville
- Kurreville is located in Cape Girardeau County
- Brownwood
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Brownwood
- Brownwood is located in Stoddard County
- Advance
(16 miles [25.7 km] to the southeast)- Note: The GPS coordinates that we are using for Advance have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Advance
- Advance is located in Stoddard County
- Population from the 2020 Census: 1,331 people
- Jump to TripAdvisor's Tourism page for Advance <3>
- Green Cox
(16 miles [25.7 km] to the southeast) - Arbor
(16 miles [25.7 km] to the southeast) - Allenville
(16 miles [25.7 km] to the southeast)- Note: The GPS coordinates that we are using for Allenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allenville
- Allenville is located in Cape Girardeau County
- Population from the 2020 Census: 118 people
- Cornwall
(16 miles [25.7 km] to the northwest) - Lowndes
(17 miles [27.4 km] to the southwest) - Castor ‑ Historic
(17 miles [27.4 km] to the south) - Delta
(17 miles [27.4 km] to the southeast)- Note: The GPS coordinates that we are using for Delta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delta
- Delta is located in Cape Girardeau County
- Population from the 2020 Census: 421 people
- Jump to TripAdvisor's Tourism page for Delta <3>
- Alliance
(17 miles [27.4 km] to the north) - Zion
(17 miles [27.4 km] to the northwest)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Glenallen. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glenallen, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |