Census Data for Gads Hill
As far as we can tell, Gads Hill<1> has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Gads Hill, you might be interested in some nearby communities where we do:
- Des Arc
(4 miles [6.4 km] to the northeast)- Jump to our Gazetteer entry for Des Arc
- Des Arc is located in Iron County
- Piedmont
(5 miles [8 km] to the south)- Jump to our Gazetteer entry for Piedmont
- Piedmont is located in Wayne County
- Jump to TripAdvisor's Tourism page for Piedmont <2>
- Annapolis
(8 miles [12.9 km] to the north)- Note: The GPS coordinates that we are using for Annapolis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annapolis
- Annapolis is located in Iron County
- Jump to TripAdvisor's Tourism page for Annapolis <2>
- Mill Spring
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Mill Spring
- Mill Spring is located in Wayne County
- Ellington
(15 miles [24.1 km] to the west)- Note: The GPS coordinates that we are using for Ellington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellington
- Ellington is located in Reynolds County
- Jump to TripAdvisor's Tourism page for Ellington <2>
- Greenville
(15 miles [24.1 km] to the southeast)- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Wayne County
- Jump to TripAdvisor's Tourism page for Greenville <2>
- Centerville
(19 miles [30.6 km] to the northwest)- Note: The GPS coordinates that we are using for Centerville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Centerville
- Centerville is located in Reynolds County
- Jump to TripAdvisor's Tourism page for Centerville <2>
- Williamsville
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Williamsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsville
- Williamsville is located in Wayne County
- Jump to TripAdvisor's Tourism page for Williamsville <2>
- Ellsinore
(21 miles [33.8 km] to the south)- Note: The GPS coordinates that we are using for Ellsinore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellsinore
- Ellsinore is located in Carter County
- Jump to TripAdvisor's Tourism page for Ellsinore <2>
- Van Buren
(23 miles [37 km] to the southwest)- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Carter County
- Jump to TripAdvisor's Tourism page for Van Buren <2>
- Arcadia
(24 miles [38.6 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Arcadia. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Iron County
- Jump to TripAdvisor's Tourism page for Arcadia <2>
- Ironton
(24 miles [38.6 km] to the north)- Note: The GPS coordinates that we are using for Ironton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ironton
- Ironton is located in Iron County
- Jump to TripAdvisor's Tourism page for Ironton <2>
- Continue List (140 more) ...
- Pilot Knob
(26 miles [41.8 km] to the north)- Note: The GPS coordinates that we are using for Pilot Knob have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pilot Knob
- Pilot Knob is located in Iron County
- Jump to TripAdvisor's Tourism page for Pilot Knob <2>
- Grandin
(28 miles [45.1 km] to the south) - Cobalt
(30 miles [48.3 km] to the northeast)- Jump to our Gazetteer entry for Cobalt
- Cobalt is located in Madison County
- Pilot Knob
Wayne County ...
Gads Hill is located in Wayne County<5>.
For more information, please visit our Census Page for Wayne County.
Miscellaneous Information for Gads Hill ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Wayne County or the community of Gads Hill:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 29 (Missouri)
- County Code: 223 (Wayne County)
- Place Code: 26195 (Gads Hill)
- State & County Code: 29/223 (Missouri / Wayne County)
- State & Place Code: 29/26195 (Missouri / Gads Hill)
- Misc. Census Codes ...
- Gads Hill is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Gads Hill.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Gads Hill. If you can help, please contact us through our Feedback Page.
The official website for State of Missouri: https://www.mo.gov/
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | It's a common practice for mapmakers to remove the apostrophe from possessive names. So Gads Hill may originally have been Gad's Hill. Sometimes the trailing 's' might be dropped altogether, in which case Gads Hill might be written as Gad Hill. For more information, please visit our Genealogy Helper Page for Gads Hill. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <5> | If you're interested in how the shape of Missouri's counties, including Wayne, have changed over time, we recommend the Atlas of Historical County Boundaries. |