Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Clubb in the Atlas, the following communities of the 1890's would have been found near the current location of Clubb. The following communities are listed based on their distance, with the one closest to Clubb listed first.
- Lowndes
(6 miles [9.7 km] to the southeast) - Bounds
(6 miles [9.7 km] to the west) - Coldwater
(7 miles [11.3 km] to the northwest) - Gravelton
(7 miles [11.3 km] to the northeast) - Greenville
(8 miles [12.9 km] to the southwest)- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Wayne County
- Population from the 2020 Census: 455 people
- Jump to TripAdvisor's Tourism page for Greenville <3>
- Buchanan
(8 miles [12.9 km] to the east) - Patterson
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Patterson
- Patterson is located in Wayne County
- Jump to TripAdvisor's Tourism page for Patterson <3>
- Brunot
(12 miles [19.3 km] to the northwest)- Jump to our Gazetteer entry for Brunot
- Brunot is located in Wayne County
- Zion
(14 miles [22.5 km] to the north) - Jewett
(14 miles [22.5 km] to the northwest) - Zalma
(15 miles [24.1 km] to the east) - Taskee Station ‑ Historic
(16 miles [25.7 km] to the south)- Note: The GPS coordinates that we are using for Taskee Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taskee Station
- Taskee Station is located in Wayne County
- Des Arc
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Des Arc
- Des Arc is located in Iron County
- Population from the 2020 Census: 162 people
- Bessville
(17 miles [27.4 km] to the northeast) - Marquand
(17 miles [27.4 km] to the northeast)- Jump to our Gazetteer entry for Marquand
- Marquand is located in Madison County
- Population from the 2020 Census: 197 people
- Greenbrier
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Bollinger County
- French Mills
(18 miles [29 km] to the northwest)- Note: The GPS coordinates that we are using for French Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for French Mills
- French Mills is located in Madison County
- Glenallen
(18 miles [29 km] to the northeast) - Vulcan
(18 miles [29 km] to the west) - Piedmont
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Piedmont
- Piedmont is located in Wayne County
- Population from the 2020 Census: 1,879 people
- Jump to TripAdvisor's Tourism page for Piedmont <3>
- Wappapello
(19 miles [30.6 km] to the south)- Note: The GPS coordinates that we are using for Wappapello have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wappapello
- Wappapello is located in Wayne County
- Jump to TripAdvisor's Tourism page for Wappapello <3>
- Idlewild
(19 miles [30.6 km] to the southeast) - Gads Hill
(19 miles [30.6 km] to the west) - Barlow ‑ Historic
(20 miles [32.2 km] to the southwest) - Kerrigan ‑ Historic
(20 miles [32.2 km] to the southwest) - Williamsville
(20 miles [32.2 km] to the southwest)- Note: The GPS coordinates that we are using for Williamsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsville
- Williamsville is located in Wayne County
- Population from the 2020 Census: 327 people
- Jump to TripAdvisor's Tourism page for Williamsville <3>
- Mingo
(20 miles [32.2 km] to the southeast) - Puxico
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Puxico have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Puxico
- Puxico is located in Stoddard County
- Population from the 2020 Census: 847 people
- Jump to TripAdvisor's Tourism page for Puxico <3>
- Lutesville
(20 miles [32.2 km] to the east)- Note: The GPS coordinates that we are using for Lutesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lutesville
- Lutesville is located in Bollinger County
- Marble Hill
(20 miles [32.2 km] to the east)- Note: The GPS coordinates that we are using for Marble Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marble Hill
- Marble Hill is located in Bollinger County
- Population from the 2020 Census: 1,460 people
- Jump to TripAdvisor's Tourism page for Marble Hill <3>
Off-the-Road Links ...
The official website for State of Missouri: https://www.mo.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Clubb, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |